Posted: 4/16/2006 2:29:11 PM EDT
|
Hi, Does RRA use the standard 1/2x28 muzzle threading? Thanks. |
| Thats a good question. Now as far as your developement on the 6.8 rifles are you going to be using the 5/8-24 thats on the .308 rifles.? I wound up with a Shaw barrel that was threaded to 1/2-36 and it was a PITA because most of the muzzel devices for 6.8 are threaded to 5/8-24. I guess Shaw, or the company they made it for did this so it could use the 9mm muzzel devices, which is what I wound up using. But it was still a little frustrating. |
|
Actually, the 6.8s with the 1/2-36 were set up to use the flash hiders from the 7.62x39....I got one a year and a half ago, and I had asked that question when I got it. We're still working on ours, but I believe that 5/8-24 will be where we go, when we get there. Steve/RRA |
Now that you mention it, I believe the 7.62x39 topic did come up. I talked to a rep at Smith Enterprises and we decided to go the 9mm Vortex route. It worked good for about 6 rounds until the chamber pressure issues took over and started blowing the primers out. Another thing I'm a little upset with the Shaw barrel over. SSA hooked me up with some ammo that should run in it now. I still havn't cleared the last jam though. 
|