[ARCHIVED THREAD] - LED location in the Micro

Posted: 9/28/2009 5:40:52 PM EDT

I have a question about the LED location in the micro, I helped a friend put another clone of the T-1 on an Ultimak for an AK and we discovered that the LED module on that particular clone has the module at the 6 o'clock position, unfortunately on an AK this blocks the irons. It might also be an issue with a lower 1/3 co-witness on an AR as well, but we haven't tried that combo.

So where is the LED module in the mirco loacted. Thanx in advance. Jeff

Posted: 9/29/2009 7:56:09 AM EDT

[#1]

The first generation has the led at th bottom.

Posted: 9/29/2009 8:42:43 AM EDT

[#2]

The Gen 2 Micro has it on the bottom as well. Not a problem in the new riser I have commong for a AR. I might have to wait for the actual production units to arrive before I can be sure on th Ultimak question.

Posted: 9/29/2009 9:01:55 AM EDT

[#3]

Ok, thanx for the reply. I intend to get one for my AR, so I'm in for at least one. Jeff

[ARCHIVED THREAD] - LED location in the Micro

Warning

Confirm Action

[ARCHIVED THREAD] - LED location in the Micro

[ARCHIVED THREAD] - LED location in the Micro