Posted: 10/18/2009 12:26:51 PM EDT
|
Are all barrels on this model 1/9?
Has anyone rebarreled one with a lighter profile bbl or 1/7 bbl? Thanks. |
|
Quoted:
If I had a lt wt barrel shawn, id box it and a bunch of Pmags to sweeten the deal. I want to cut it down to 14.7, recountour to M4/restamp, then perm attach an A2 flashhider. I don't think you can recontour a light weight barrel to a m4 profile because the barrel is too thin. I think the whole barrel is the same diameter as the m4 cutout, though I could be wrong on that. I should go measure it... |
|
Quoted:
Quoted:
If I had a lt wt barrel shawn, id box it and a bunch of Pmags to sweeten the deal. I want to cut it down to 14.7, recountour to M4/restamp, then perm attach an A2 flashhider. I don't think you can recontour a light weight barrel to a m4 profile because the barrel is too thin. I think the whole barrel is the same diameter as the m4 cutout, though I could be wrong on that. I should go measure it... he means the HBAR on the 6721 not the LT barrel. and I would make that trade with you in a heart beat 
|