Posted: 3/23/2017 9:56:45 PM EDT
|
Sent a 18" Stealth to Adco for some Mod H love.
Turned out great, just waiting for my rings to get the Leupy mounted up and test it out. Surely not the first LT barrel MK12 out there... 
|
|
Quoted:
Sent a 18" Stealth to Adco for some Mod H love. Turned out great, just waiting for my rings to get the Leupy mounted up and test it out. Surely not the first LT barrel MK12 out there... https://www.AR15.Com/media/mediaFiles/325748/IMG-20170323-175029037-172579.jpg https://www.AR15.Com/media/mediaFiles/325748/IMG-20170323-175039714-172580.jpg https://www.AR15.Com/media/mediaFiles/325748/IMG-20170323-175058535-172582.jpg https://www.AR15.Com/media/mediaFiles/325748/IMG-20170323-213426860-172587.jpg |
|
The main items are profiling the end of the barrel to take the Op's/AE collar that has to be custom turned from a blank due to the smaller diameter of the Stealth out ahead of the gas block as compared to the AE specs. Also had them blast the barrel, and the color turned out better than I expected.
In this case I sent an 18" so that they had plenty of barrel at the end to try to match up the specs from the muzzle to the shoulder before proceeding with the contour for the collar. |
|
Quoted:
Allen Engineering AEM5 reflex can, which is the available version of the Ops Inc issue Quoted:
Quoted:
What's the collar for? |
|
Quoted:
Spikes Tactical Suppressor system is a reflex design that uses a similar collar on the barrel. Good to see that the adapting can be done with LT barrels. If you don't mind answering, what's the ballpark total for that barrel rework? |