Posted: 5/16/2016 3:06:14 PM EDT
| Anyone try the LT845 and a Vortex Gen II 4.5x27? About to hit the Go button, but figured I'd ask here first to see if the two will work together. Called the shop and they said I could return it as long as I just set it in the mount to see if it will clear. But again I figured I'd ask first. |
|
Quoted:
Is this for an AR or a bolt gun? The bell of the 4.5-27 is 56mm which is 2.24 inches.....divided by 2 is 1.12 inches, and the LT845 is 1.53" above the rail....so you'll clear it....but if this is a bolt gun your cheek weld is going to be pretty tall It's going on my OBR. I'm wondering if the small upper rail section on the top cap will clear the 56mm objective. |
|
Quoted:
It's going on my OBR. I'm wondering if the small upper rail section on the top cap will clear the 56mm objective. Quoted:
Quoted:
Is this for an AR or a bolt gun? The bell of the 4.5-27 is 56mm which is 2.24 inches.....divided by 2 is 1.12 inches, and the LT845 is 1.53" above the rail....so you'll clear it....but if this is a bolt gun your cheek weld is going to be pretty tall It's going on my OBR. I'm wondering if the small upper rail section on the top cap will clear the 56mm objective. I don't see why it would not clear. |
|
Quoted:
I don't see why it would not clear. Quoted:
Quoted:
Quoted:
Is this for an AR or a bolt gun? The bell of the 4.5-27 is 56mm which is 2.24 inches.....divided by 2 is 1.12 inches, and the LT845 is 1.53" above the rail....so you'll clear it....but if this is a bolt gun your cheek weld is going to be pretty tall It's going on my OBR. I'm wondering if the small upper rail section on the top cap will clear the 56mm objective. I don't see why it would not clear. Thanks! I hope so! Going to just pull the trigger today and see how it fits when it gets here. |