Posted: 11/29/2013 9:50:09 PM EDT
|
Which LaRue mount would you pick to mount a Leupy Mark 6 or 8 (1-6 or 1.1-8) on a LMT MWS? The OBR mount? It says something about MOA built into the rail of the OBR rifle? I would hate to pick the wrong mount and run out of elevation. Range is less than 1000m....mostly 100-300m.
Lots of LaRue mount choice and many appear to be almost the same. No need to worry about where the mount can sit on the LMT MWS since it is a monolithic rail. Thanks! |
|
Quoted:
Would you mind explaining the reasoning for that? I am not sure I understand the advantage of the LT-111/120 over the LT-104. Thanks! j Quoted:
Quoted:
I would suggest the LT111 on the LMT MWS. Would you mind explaining the reasoning for that? I am not sure I understand the advantage of the LT-111/120 over the LT-104. Thanks! j The 104 will position the scope farther forward, and sits just a little lower than the 111. Either should work with back-up irons under. Since I wasn't worried about irons, I went with the LT807 for my Mark 6 on my tOBR. It sits lower than the 104 or 111, and gives me great cheek-weld with the RAT stock. |
I went with the LT 111 with my MWS and was originally going to use the Mark 6 but ended up with an HDMR. I plan on using a NVD in the future and the 111 lines up better. Also since it's a monolithic platform I have no need for the goose necked 104 to place the optic in the proper eye relief position. I use LT 104's on my 15's and 111's on my 10's. Even if it wasn't an MWS with a mono upper, the upper receiver is longer on a 10 than a 15 so the ocular lens is in the proper position with a LT 111. (For me anyways) It's also more expensive so it has to be better right
|