Posted: 3/24/2013 4:47:23 AM EDT
| Looking for some pics of a TA31 mounted on a LT681 with buis underneath it all. I just picked up a TA31 and the factory mount fits everything above my buis but it kind of pointless to need to use tools to remove the acog and deploy my rear buis if needed. Also looking to get the whole unit to sit a bit further back to help with eye relief. |
|
Quoted:
Does that mount allow you to "quickly" remove the ACOG by just moving the lever thing? I was thinking about an ACOG, but wanted to be able to use my BUIS when I preferred as well. Like the OP, I would want to avoid using tools to remove the sight... YES LaRue QD mounts are lightning fast on-off and repeatable |
|
Quoted:
Here is my TA31RCO on the LT681/ I have the Troy BUIS on the first gap and the lug for the LT681 in T10, which is as close as you can get it. http://imageshack.us/a/img203/310/img0752b.jpg http://imageshack.us/a/img836/3055/img0749pi.jpg Thanks for posting. I was really hoping the 681 would move the optic further back. Here is what I'm working with right now, it seems like the trijicon mount gets me further back the 681 would. I wonder of I should just go with the LT100. 
|
|
Quoted:
Quoted:
Here is my TA31RCO on the LT681/ I have the Troy BUIS on the first gap and the lug for the LT681 in T10, which is as close as you can get it. http://imageshack.us/a/img203/310/img0752b.jpg http://imageshack.us/a/img836/3055/img0749pi.jpg Thanks for posting. I was really hoping the 681 would move the optic further back. Here is what I'm working with right now, it seems like the trijicon mount gets me further back the 681 would. I wonder of I should just go with the LT100. http://i583.photobucket.com/albums/ss271/e46m3kid/20130323_183040_zps1a812168.jpg http://i583.photobucket.com/albums/ss271/e46m3kid/20130324_173916_zps1c9a184e.jpg Might wanna replace the BUIS if you wish to run some LT goodies on there. The whole thing may implode upon itself and create a blackhole 
|
|
Quoted:
Thanks for posting. I was really hoping the 681 would move the optic further back. Here is what I'm working with right now, it seems like the trijicon mount gets me further back the 681 would. I wonder of I should just go with the LT100. http://i583.photobucket.com/albums/ss271/e46m3kid/20130323_183040_zps1a812168.jpg http://i583.photobucket.com/albums/ss271/e46m3kid/20130324_173916_zps1c9a184e.jpg The LT681 was really meant to be run without a BUIS behind it, and is contoured so you can still get to the charging handle as such: 
|
|
Quoted:
Its not ideal, but with that mount you could mount the BUIS in front of the ACOG if you needed it back further. This is on a midlength setup so if I have to go that route it wouldn't be the end of the world. Honestly having my optic in a comfortable position is worth sacrificing a couple inches of BUIS radius. |