Posted: 6/29/2010 5:38:57 AM EDT
|
My OBR has a CTR w/riser, which sets up just fine with both my LT-139 mounted scope and Troy BUIS. So where is the proble you might ask... Well, I don't use the stock fully extended and the riser impeedes the charging handle for both charging and clearing the weapon. So the question is, for LT or others with CTR's, what us the best set up to avoid the needing the riser? Is there a lower version of the -139 or -104 in the works (like a -158 without the 10 MOA)? Maybe lower BUIS like the Troy micros, or is my best bet to mod the riser, cutting it back to make room for the CH? |
|
Quoted:
Quoted:
Quoted:
What scope do you have? Right now, a Millett DMS. Might put on something a little larger down the road, in the 40-50mm objective arena. Since you said that, I'd suggest modifying the riser Thanks. If I were going to stay with the 1-4x type, what would you recommend? |
|
Quoted:
Quoted:
Quoted:
Quoted:
What scope do you have? Right now, a Millett DMS. Might put on something a little larger down the road, in the 40-50mm objective arena. Since you said that, I'd suggest modifying the riser Thanks. If I were going to stay with the 1-4x type, what would you recommend? On the OBR, I'd go with the LT123 rings |