Posted: 2/10/2010 10:56:46 AM EDT
|
Is Larue coming out with different colors ? O.D Green, FDE, Tan ? |
|
Mr. Larue,
Do you happen to have any pictures of the UDE index clips from Shot Show, or filed away anywhere else? I have purchased two cans of them already, and I think they're absolutely fantastic! Perfect fit and super low profile on your 10.0 rail that I have on my SBR. Keep on keepinn on, good Sir. |
|
ordered 2 sets of the black , arrived testerday , just put 1 set on , they are really gr8, the best rail covers i have seen , and the cost is actually cheap, compared to all that i have looked at , others want 40 bucks to cover a carbine length quad rail, for the 20 bucks , i think its a steel ,
satisfied customer, thank you , LT
|
|
Quoted:
so how many cans would it take to cover the 13.2? I need to order some and want to have MORE than i need, in true arfcomm fashion I need a little bit more than 1 can to do it to my 13.2. And that was just for the bottom/left/right. For all 4 rails you'd definitely need 2 cans. |
|
Quoted: Quoted: so how many cans would it take to cover the 13.2? I need to order some and want to have MORE than i need, in true arfcomm fashion I need a little bit more than 1 can to do it to my 13.2. And that was just for the bottom/left/right. For all 4 rails you'd definitely need 2 cans. Well if you just want the plain clips on there, and it's for the bottom, left, and right only, you'd need a good 2 cans. For the top, too, you'd need 3. |
|
Alright heres actual numbers:
90 to cover bottom/L/R 121 to cover all 4 Each rail has 30 sections, except the top which has 31. 1 can of Index Clips has 60 regular clips. 2 cans of Index Clips will cover an entire 13.2 inch rail with the regular clips, so long as you have a front site or somesuch accessory on there (I'd hope so... it's a 13.2 inch rail...) |

