Posted: 6/27/2014 7:21:06 AM EDT
|
I have some of the black nitride bolts.There was an issue with the case ejecting in a rifle. Upon inspection,the extractor was facing the wall of the upper receiver instead of the ejection port. I did not think this was possible, but see that some manufacturers allow this by cutting out an extra step in the machining. Was this intentional or did i get one that they missed in QC?
|
|
Quoted:
Yes, i know. But that has never been possible in any other bolt i owned. I am not at home to check the others i have, so am not sure if they were ALL manufactured this way. Can you email me at [email protected] some pics and your order #. We will get you taken care of. Fungus |
As always, AIM takes care of it's customers. I found two bolts that had this issue. They at first offered a full refund, but allowed me to swap the BCG's out for the NiB as they are the same price and the melonite BCG is out of stock. I didn't ask for anything extra to compensate me for my troubles... perhaps a sticker can be included? Shame when you have to beg a company to advertise for them! 
|
|
Quoted:
As always, AIM takes care of it's customers. I found two bolts that had this issue. They at first offered a full refund, but allowed me to swap the BCG's out for the NiB as they are the same price and the melonite BCG is out of stock. I didn't ask for anything extra to compensate me for my troubles... perhaps a sticker can be included? Shame when you have to beg a company to advertise for them! I will make sure to throw in TWO stickers! |