[ARCHIVED THREAD] - P64 (Page 1 of 2)
Posted: 5/15/2011 10:31:25 AM EDT
| How many months until they land? |
|
My P64 I got from AIM a while back looked practically brand new. It's in amazing condition. Still need to go shoot it, just haven't had the time. Change out the hammer and recoil springs with the appropriate Wolff springs. That stock double-action pull took two fingers and some elbow grease before the change. It was brutal. |
|
Quoted:
Quoted:
According to the product description here: http://www.aimsurplus.com/product.aspx?item=f3p64 it ships with two 6-round mags. when did these get posted? darn it They're not technically posted (if you go through our website direct) but if you have an old link you can pull it up. |
|
Quoted:
Quoted:
Have seen numerous recommendations to change the springs in the P64. What should the hammer spring and recoil spring be changed too? not sure, mine is in stock config When I ordered my springs from Wollf they did not yet make anything for the P64. They do now make specific spring for it. Check here : http://www.gunsprings.com/1ndex.html I used a 16 lb hammer spring for a Walther PPK - Wolff Part # 25816 and a 25 lb. recoil spring (the spring that goes around the barrel) for a Heckler & Koch P-7, 9mm Wolff Part # 44325. |
|
Quoted: no, should have them Tuesday, i will make sure i take care of all you guys on them since you guys were patient with the shipping delay Crap...I'm going to be in the hospital still. Got surgery on Monday and they're keeping me there Tuesday. Gonna have a decent amount of them? Don't want to miss out this time around.
|