Posted: 3/15/2010 3:22:37 PM EDT
|
I bought my stainless .22 conversion from Palmetto State a month or so ago, and finally got to try it out this weekend. It ate all the ammo i tried, Rem bulk, federal bulk, CCI, and some Eley HV I bought from century. I only had one problem though, one of my magazines I have would shoot about 3-4 rounds, and then the round would pop strait up, and get stuck between the conversion, and the charging handle, and jam the whole thing up.
The only thing I noticed different about this mag is the seam in the polymer, where the feed-lips are has a larger gap than the other mags, but other than that it looks the same.... 
|
|
Quoted:
I bought my stainless .22 conversion from Palmetto State a month or so ago, and finally got to try it out this weekend. It ate all the ammo i tried, Rem bulk, federal bulk, CCI, and some Eley HV I bought from century. I only had one problem though, one of my magazines I have would shoot about 3-4 rounds, and then the round would pop strait up, and get stuck between the conversion, and the charging handle, and jam the whole thing up. The only thing I noticed different about this mag is the seam in the polymer, where the feed-lips are has a larger gap than the other mags, but other than that it looks the same.... http://i67.photobucket.com/albums/h313/joe7170/IMAG0021.jpg Somebody is going to get beaten for that  If you tighten the top screw, that will eliminate the gap. If for some reason that doesn't get it, give us a buzz.
|
