Posted: 1/13/2011 6:22:47 PM EDT
|
I tried emailing Magpul's CS and also PM'd "Magpul" here, Monday and Sunday respectively, both with no response yet.
I have 11 out of spec Pmags, 10 lightly used and 1 BNIP. They are about .01" too large and therefor won't drop free. These are dated 1/09, black, non-window, and 30rd. Is there anyway I can get these replaced? ETA: Just minutes ago, I got a response from Magpul via email and they are sending replacements plus postage to return the out of spec ones. 
ETA2: I had to wait for the new batch of black Pmags to be finished but received them sooner than I expected. The new ones are perfectly in spec. Thanks!!!! |
|
Quoted:
Its very likely that your lower is out of spec. PMAG are larger than USGI mags. A lower that will drop USGI mags will not necessarily drop PMAGs. But they do tend to drop free from any in spec Colt lower. With other brands it a crap shoot. No, I've tried them in two brand new Spike's lowers, bought at different times, from different lots(different s/n prefix). However the most telling is the fact that my 5/09 dated Pmags drop free perfectly and measure .01" smaller than the 1/09 dated mags. I even opened a brand new mag of each date to rule out the chance that the mags have stretched from use. I also used my digital calipers to measure the Spike's magwells and they are within spec, though slightly smaller than my RRA lowers. |
|
Quoted: I tried emailing Magpul's CS and also PM'd "Magpul" here, Monday and Sunday respectively, both with no response yet. I have 11 out of spec Pmags, 10 lightly used and 1 BNIP. They are about .01" too large and therefor won't drop free. These are dated 1/09, black, non-window, and 30rd. Is there anyway I can get these replaced? We're in the week leading up to SHOT show, so they are most likely running around like chickens with their heads cut off getting ready. Give them a week or 2 to do the show and get back to the office before jumping down anyones throat. |
|
Quoted:
Quoted:
I tried emailing Magpul's CS and also PM'd "Magpul" here, Monday and Sunday respectively, both with no response yet. I have 11 out of spec Pmags, 10 lightly used and 1 BNIP. They are about .01" too large and therefor won't drop free. These are dated 1/09, black, non-window, and 30rd. Is there anyway I can get these replaced? We're in the week leading up to SHOT show, so they are most likely running around like chickens with their heads cut off getting ready. Give them a week or 2 to do the show and get back to the office before jumping down anyones throat. Good point, I didn't think about how busy they might be preparing for SHOT, though I wouldn't say I'm jumping down anyone's throat 
|
