Posted: 6/15/2005 8:19:08 PM EDT
|
I recently read an article that had a photo of an adjustable stock similar to one found on the PSG-1 and more appropriate for a ar15 set-up for precision shooting, does anyone have anymore info on that stock? I'll see if I can post a photo of it later. |
|
Rich...coreect me if I'm wrong, but the M95 spin-off should work with the AR-10 rifles, but due to the extra length of the charging handle on the 10, the adjustable check piece may get in the way. Regardless...I'll be getting at least one when they're introduced and it WILL be tried on one of my 10s. ORD out... (And patiently waiting) 
|
This is correct. But we have addressed the issues by building two parts to be swapped out for use with AR10 type rifles. This mod will effectively remove 0.5 inch from the front of the rising cheek piece and allow the longer charging handle to function. |
Yes a 1" extension kit could be used. In fact for testing on the 308s we added a front spaceer of 0.6 length and used the stock A1-A2 spacer on the back of the buffer tube. It does make the stock lonnnng though. |