Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
7/2/2009 1:36:44 PM EDT
Kenmore door dispensor refrig.
Had a new ice maker installed last year, and it's on the fritz.......

Will work for a while, then quit for a couple of days.

I raise and lower the contact arm, beat on the front, mash the little ice cube separators etc.
Sometimes it responds;sometimes not.

Any ideas?
7/2/2009 1:43:29 PM EDT
[#1]
Grenade
7/2/2009 1:59:12 PM EDT
[#2]
We had a GE refrigerator with ice maker problem. They wanted to charge several hundred dollars to replace the ice making unit. We fixed it ourselves. The problem was low water flow caused by a filter needing to be replaced. The low water flow was causing water to freeze in the piping blocking the cubes from being made. We thawed it out, replaced the filter and haven't had a problem since.
7/2/2009 2:11:24 PM EDT
[#3]
This may not be your model but this forum will have the answer somewhere.

http://www.applianceblog.com/mainforums/showthread.php?t=1688
7/2/2009 2:15:01 PM EDT
[#4]
Quoted:
We had a GE refrigerator with ice maker problem. They wanted to charge several hundred dollars to replace the ice making unit. We fixed it ourselves. The problem was low water flow caused by a filter needing to be replaced. The low water flow was causing water to freeze in the piping blocking the cubes from being made. We thawed it out, replaced the filter and haven't had a problem since.


+1
7/2/2009 2:47:56 PM EDT
[#5]
Mine had an Ice Dam in the fill tube. A manual defrost and makes ice like a charm now.
7/2/2009 2:55:34 PM EDT
[#6]
Water supply good?  



Cycling properly?  Put a playing card on the pusher to see if it is cycling.  



How much stuff in the freezer compartment?  Things can block the flow of air, preventing proper heat transfer.  Ice makers are thermostatically controlled.  There is a thermal switch which closes when the temp gets about 10 F on the tray, this triggers a clock drive which actuates a microswitch, turning on a heater element until the pusher ejects the cubes.  Another microswitch is then triggered by the clock drive to initiate water flow, the duration is timed and adjustable for cube size.



Finally, clean the condenser section.  Modern units have forced cooling on the back/bottom.  Unplug, take the back off and vacuum out the coils every 6 months.
7/2/2009 2:57:34 PM EDT
[#7]
As stated earlier, make sure the water supply is good and clear.  My GE fridge took a surge which wiped out the thermostat, defrost timer and water valve.  I spent about $100 replacing all of these vs. $1000 for a new fridge.
Close Join Our Mail List to Stay Up To Date! Win a FREE Membership!

Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!

You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.


By signing up you agree to our User Agreement. *Must have a registered ARFCOM account to win.