Posted: 11/25/2003 5:40:25 PM EDT
|
I'm working on switching over to Linux, and I'd like to get a router that will handle DHCP for both Linux and Windoze. Anybody got a recommendation? Please feel free to recommend a Linux distro as well. Thanks! |
|
DHCP is a standardized protocol, so if it delivers DHCP to Windows, it will do so to Linux as well. Personally I have the Linksys wireless router/switch and like it alot. For ease of use, I'd pick Redhat 9.0. It's the most widely used and most often updated distro. |
|
Quoted: For ease of use, I'd pick Redhat 9.0. It's the most widely used and most often updated distro. I've been a fan of RedHat for years (I have a RH9 router and RH9 webserver), but they are ending support for RH9 in April. RedHat Linux is going to be superceded by the community-supported Fedora Project: [url]http://www.redhat.com/solutions/migration/rhl/[/url] Might as well start with a distro with a better life expectency... |
|
Dude! Simplify! I have been running FreeSCO for 3 years now and it kicks ass like the Predator in a daycare center. Easy to set up, and free. Firewall is bulletproof and runs on the MATURE 2.0 kernel. No overflow troubles. Fits on a FLOPPY, needs a 386 minimum to run. Screams on cable and DSL, and if you are in the boonies, will automatically dial up /via modem to most providers on demand! Hangs up when you don't need it. Set it and forget it. [url]www.freesco.org[/url] You will be glad you did.. |
|
Quoted: I've seen a couple of Linksys routers that say they aren't for linux, but no specification why? most likely because they require an Internet Explorer browser to access the router configuration and as far as I know, IE is not available for linux. If this is the case, you would need at least one windows device to access the configuration. |
|
Quoted: Quoted: I've seen a couple of Linksys routers that say they aren't for linux, but no specification why? most likely because they require an Internet Explorer browser to access the router configuration and as far as I know, IE is not available for linux. If this is the case, you would need at least one windows device to access the configuration. I can attest to the Linksys routers configuring fine in mozilla. It usually means that they refuse to answer tech support calls from people with linux or some other unix flavor. Geoff |