Posted: 8/15/2011 5:54:16 PM EDT
|
Ok GD, I have an MSI P67A-C43 with a 1155 i5-2500k
I DO NOT NOTICE ANY PROBLEMS WHAT-SO-EVER but during start-up there are three quick beeps a little pause and then another quick single beep. I can't seem to find this specific code. A video will come shortly. Thanks Link to Mobo video of it below (you are going to have to crank up the volume) 
|
|
Found this here:
http://forum-en.msi.com/faq/article/bios-beeps-and-codes There are several beeps, but my computer starts as normal?
On recent MSI boards, (and those from other manufacturers using AMIBIOS) as well as a single loud beep to indicate successful POST, you'll also hear some lower tone beeps. This is just the BIOS notifying you of USB devices connected as it looks for bootable USB devices, and input devices such as keyboards and mice. The number of beeps will change depending on how many USB devices you have connected. If you see the POST screen / BIOS logo and your system boots as normal, then you do not have a problem! YMMV |
|
Quoted:
Found this here: http://forum-en.msi.com/faq/article/bios-beeps-and-codes There are several beeps, but my computer starts as normal?
On recent MSI boards, (and those from other manufacturers using AMIBIOS) as well as a single loud beep to indicate successful POST, you'll also hear some lower tone beeps. This is just the BIOS notifying you of USB devices connected as it looks for bootable USB devices, and input devices such as keyboards and mice. The number of beeps will change depending on how many USB devices you have connected. If you see the POST screen / BIOS logo and your system boots as normal, then you do not have a problem! YMMV Test by yanking all the USB devices and booting. |
|
Quoted:
Quoted:
Found this here: http://forum-en.msi.com/faq/article/bios-beeps-and-codes There are several beeps, but my computer starts as normal?
On recent MSI boards, (and those from other manufacturers using AMIBIOS) as well as a single loud beep to indicate successful POST, you'll also hear some lower tone beeps. This is just the BIOS notifying you of USB devices connected as it looks for bootable USB devices, and input devices such as keyboards and mice. The number of beeps will change depending on how many USB devices you have connected. If you see the POST screen / BIOS logo and your system boots as normal, then you do not have a problem! YMMV Test by yanking all the USB devices and booting. aaaaah thanks fellas. I can only think of two USB devices plugged in, I will try to unplug them tomorrow. much appreciated! |