Trying to zero an SR-25 with CQBSS in an LT104 mount. I cant dial the scope down enough to get the impact on the cross hair. Dialed all the way down it will only put the impact at the +1mil line.
Posted: 5/21/2017 12:25:35 PM EDT
[#1]
The LT 104 has 0 degrees of incline this could be your reason.
Posted: 5/21/2017 12:49:25 PM EDT
[#2]
You need a scope mount with some degree of cant.Look at Bobro.
Posted: 5/21/2017 12:54:09 PM EDT
[#3]
Unless KAC uses an upward sloped rail on their rifles, you shouldn't need a mount that has any slope in it to zero up close.
Are your zero stops unlocked?
Posted: 5/21/2017 1:03:25 PM EDT
[#4]
That scope has 150 MOA of adjustment. You shouldn't need any MOA to zero at 100 or anywhere. Is there a zero stop you are hitting?
Posted: 5/21/2017 4:03:48 PM EDT
[#5]
Quote History
Quoted: Unless KAC uses an upward sloped rail on their rifles, you shouldn't need a mount that has any slope in it to zero up close.
Are your zero stops unlocked?
View Quote
This.
Unless zeroing at 600m.
Posted: 5/21/2017 6:54:34 PM EDT
[#6]
Yep, stop was engaged, but I thought it was disengaged.... Took the turret off and the detent ring was bent out of shape. Bent it back into shape and all is well with the world.
