Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
2/4/2015 2:50:54 PM EDT
I was researching well water in-line hand pumps and I've found the Simple Pump and Bison.  

The Simple Pump ordering instructions have you measure your well depth, the pump depth and the static water level.

My well is 150' deep but the water level is at 7' feet.  (We checked and double checked the water level)

Both the Simple Pump and Bison pump are able to pump water much deeper than the typical 33 to 25 feet deep and are priced accordingly.

Is there a less expensive option than either of the pumps above that'll install in-line with the electric pump?  
2/4/2015 3:49:16 PM EDT
[#1]
Quoted:
I was researching well water in-line hand pumps and I've found the Simple Pump and Bison.  

The Simple Pump ordering instructions have you measure your well depth, the pump depth and the static water level.

My well is 150' deep but the water level is at 7' feet.  (We checked and double checked the water level)

Both the Simple Pump and Bison pump are able to pump water much deeper than the typical 33 to 25 feet deep and are priced accordingly.

Is there a less expensive option than either of the pumps above that'll install in-line with the electric pump?  
View Quote




Doesn't Harbor Freight or Northern Tool have a Pitcher Pump for shallow wells?

Very inexpensive and effective.


Or you could use a 12 vdc RV type water pump for auto or semi-auto operation and eliminate the hassle of pumping and have water quickly available from a small, let's say 30 gallon tank. Even an old water heater would work well for the tank and could be pressurized for instant demand capability.



2/4/2015 4:21:20 PM EDT
[#2]
tractor supply pitcher pump

The Cast Iron Pitcher Pump is specifically designed for shallow well applications to 25 ft. or less. Includes an adjustable cap for optional handle positions and a pitcher spout that holds the pail for easy operation.
Fluid Types: Water
Lever action
Inlet Port Size: 1-1/4 in.
Outlet Port Size: 5/8 in.
View Quote
2/4/2015 4:23:41 PM EDT
[#3]
Quoted:
I was researching well water in-line hand pumps and I've found the Simple Pump and Bison.  

The Simple Pump ordering instructions have you measure your well depth, the pump depth and the static water level.

My well is 150' deep but the water level is at 7' feet.  (We checked and double checked the water level)

Both the Simple Pump and Bison pump are able to pump water much deeper than the typical 33 to 25 feet deep and are priced accordingly.

Is there a less expensive option than either of the pumps above that'll install in-line with the electric pump?  
View Quote



Whatever shallow well pump you go with, I'd extend the well pipe, in the well you have described with the water line at 7 feet, at least to 50 feet to try to get less stagnant water, than would be the case at levels just below 7 feet.




2/4/2015 5:17:50 PM EDT
[#4]
We installed a 'Harvard " pitcher pump on ours. Its shallow and artisan right now. Got it set up to run with or with out the pump. The pump is there for when the water level dips...right now I want water I turn on a hose bib.

Posted Via AR15.Com Mobile
2/4/2015 5:17:55 PM EDT
[#5]
Also, check your elevation for use with a pitcher pump. They operate on atmospheric pressure, so if you are in the mountains, they are less effective than at sea level.
 



ETA: Just seen you are listed as FL, so you are probably GTG for something like 30 feet to water level.
2/4/2015 6:36:24 PM EDT
[#6]
Quote History
Quoted:
Also, check your elevation for use with a pitcher pump. They operate on atmospheric pressure, so if you are in the mountains, they are less effective than at sea level.  

ETA: Just seen you are listed as FL, so you are probably GTG for something like 30 feet to water level.
View Quote




He said the water line is at 7 feet.... He's good...

So if he puts put's his pickup pipe down at 50 feet or more, he will likely get fresher water.





2/4/2015 6:50:34 PM EDT
[#7]
Keep in mind that your static level of 7 feet will drop with dry conditions, and depending upon your well, the level can drop dramatically during use.
Our well (with a simple pump in it) has a static level of ~10 feet, but that drops quickly to ~60 during moderately heavy use.

Re-measure the water level during a period of regular use to get an idea of how much and how quickly the level will drop in your well.
2/4/2015 7:00:41 PM EDT
[#8]

Quote History
Quoted:
He said the water line is at 7 feet.... He's good...



So if he puts put's his pickup pipe down at 50 feet or more, he will likely get fresher water.
View Quote View All Quotes
View All Quotes
Quote History
Quoted:



Quoted:

Also, check your elevation for use with a pitcher pump. They operate on atmospheric pressure, so if you are in the mountains, they are less effective than at sea level.  



ETA: Just seen you are listed as FL, so you are probably GTG for something like 30 feet to water level.


He said the water line is at 7 feet.... He's good...



So if he puts put's his pickup pipe down at 50 feet or more, he will likely get fresher water.
50 feet would be good.

 



OP: Make sure you don't have torque arrestors, or the old style pitless adapter installed. Those can make it impossible to do anything. We have the old style pitless adapter installed, and I can't install squat until I dig up the top of the well.