ARFCOM 1 MOA ALL DAY LONG Challenge (Page 29 of 36)
|
From the 3rd Annual GA HTF MOA Challenge:
Target at 100yds: Attached File Target: Attached File Calipers: Attached File Rifle as shot: Attached File SPR Division, wiseanhyzer: Home built with 20" LaRue Stealth barrel. Trijicon RS29 4-16x50 in LT104. ADI69 gr. Groups: 0.893", 1.251", 1.230", 0.796", 0.674" = 0.968" = 0.925 MOA |
|
From the 3rd Annual GA HTF MOA Challenge:
Target at 100yds: Attached File Target: Attached File Calipers: Attached File Rifle as shot: Attached File Bolt Division, wiseanhyzer: Tikka CTR 308. Trijicon RS22 2.5-10x56. FGMM 168gr. Groups: 0.405", 0.817", 0.783", 0.647", 0.917" = 0.713" = 0.681 MOA |
A drawl doesn't mean I'm ignorant, just Southern..
Joined:
Jun 2015
Posts:
3022
EE: 0% (0)
|
...This year's results from the GHTF MOA Challenge....Not as good as last years .75 MOA but at least it gives me something to work on over the Winter....
SPR division, 100 yards, Draconis LaRue 5.56, 20" Stealth shooting handloads Groups: .741 + 1.244 + .622 + .834 + .773 = 4.214 / 5 = .8428 average = .804 MOA ...Range and set up.. Attached File ...Target with calipers..... Attached File ...Scored target with swag.... Attached File ...Again, I want to say Thank You very much to Mark and LaRue Tactical for sponsoring this for the GHTF again this year and Thanks to GaHunter for hosting.. ....Also, congratulations to all the shooters, sub-MOA , not so sub-MOA and tiny group shooters alike for taking the time to come out and see what they and their equipment could do....
...I don't think I'll be the only one trying to fine tune over the next year.... |
Part-time plastic pony wrangler for frightened snowflakes in need of a safe space.
"It's better to be careful 100 times than to get killed once."-Mark Twain
"If it's stupid but works, it isn't stupid."- Anon
"It's better to be careful 100 times than to get killed once."-Mark Twain
"If it's stupid but works, it isn't stupid."- Anon
|
Originally Posted By akethan:
Too big Originally Posted By akethan:
Originally Posted By JmacAr:
Consider this my placeholder, but I have a question regarding the rear bag... This is the only bag that I have and I don't remember who made it so I can't give you the website URL. **Edit** Just checked the link earlier in this thread, 100% sure it's this bag: http://www.triadtactical.com/Red-Tac-Gear-Rear-Bag.html Just want to know if the results will be official or un-official Picture next to my shoe to give a size reference. http://i60.tinypic.com/2yy9grb.jpg
|
|
Originally Posted By akethan:
Nope see page 1 for approved bags. Ask questions here |
Well I was hoping for something averaging .7 and beat it! Shot with mono pod hinge disengaged and hand on it.
upload pics direct link
upload pics direct link
upload pics direct link
photo uploading sites SPR- JPgolffl, Home built mega MKM, Larue stealth 18 inch, Leupold MK4 3.5–10, tactical yoga mat, LC Varget SMK77 handloads. 0.934+0.741+0.743+0.818+0.800/5= 0.8072-0.224=0.5832/1.047=0.5570MOA Edited to correct score. |
|
Cold killed my phone, so no photos from the range. Took target home and got a caliper. Rifle is a Remington 700 sps that I stuck in an XLR element chasis (extended cheek rest) , vortex PST 6-24 ffl, mrad . Ammo was store bought Hornady Vmax 55 grain. Attached File Attached File Attached File Attached File |
"I'm a master mechanic, I can take anything apart, usually get it back together too without too many extra parts.."
|
Originally Posted By fsjdw2:
Cold killed my phone, so no photos from the range. Took target home and got a caliper. Rifle is a Remington 700 sps that I stuck in an XLR element chasis (extended cheek rest) , vortex PST 6-24 ffl, mrad . Ammo was store bought Hornady Vmax 55 grain. https://www.AR15.Com/media/mediaFiles/216165/3035319F-D639-46BE-88EC-91676FC71B4A-380702.JPGhttps://www.AR15.Com/media/mediaFiles/216165/ACCD11AD-2C61-4FF5-A400-7C4E08D9EAA2-380703.JPGhttps://www.AR15.Com/media/mediaFiles/216165/6F8DB62F-6A8E-4C80-85C8-3D075F668FFE-380704.JPGhttps://www.AR15.Com/media/mediaFiles/216165/347AFCBB-8CAB-48C4-BCCE-CA6536DB60D8-380705.JPG Good shootin'. |
Distinguished Rifleman #2223
#FreeBradders
"Technique isn't something that can be taught. It's something you find on your own." - Bunta Fujiwara
#FreeBradders
"Technique isn't something that can be taught. It's something you find on your own." - Bunta Fujiwara
|
Originally Posted By akethan:
https://www.AR15.Com/media/mediaFiles/14209/uu30811-395322.jpg https://www.AR15.Com/media/mediaFiles/14209/uu30812-395323.jpg Shot this in under 10 minutes today. She was hot! LaRue UU kit 18" tOBR barrel in 308. . SPR division akethan Larue Ultimate Upper Kit 18"308 tOBR barrel IOR MP8 GMM168 .764/.703/5.83/.593/1.285= .786 Originally Posted By akethan:
https://www.AR15.Com/media/mediaFiles/14209/uu30811-395322.jpg https://www.AR15.Com/media/mediaFiles/14209/uu30812-395323.jpg Shot this in under 10 minutes today. She was hot! LaRue UU kit 18" tOBR barrel in 308. . SPR division akethan Larue Ultimate Upper Kit 18"308 tOBR barrel IOR MP8 GMM168 .764/.703/5.83/.593/1.285= .786
Originally Posted By akethan: Rules for posting are on page #1 |
|
Originally Posted By jpgolffl: Missing a couple of pics there dear leader! And you left my name off of the #8 spot ![]() You're right I haven't posted a pic of my measurement I was planning on doing that tonight. On target is jacked Next time post in the discussion thread. |
|
My entry...
Witnessed by Winston Wolf, Desert Moon, both ARFCOM members. 100 yrds Remington 700 PSS Tasco scope (old school jap) Federal 168 SMK Front bag, no other support, to be fair, I used to use this rifle for 1000 yard shoots. I really have no real way to measure, figured it was good enough on the ARFCOM small target. Thanks for firing me up, been at least 2 years since I shot this rifle! On to the pics! The range... Attached File The target, 5 rounds of Fedeal Match 168 SMK*... Attached File * It seems to be loaded hotter than Military Match with 168 SMK. |
I have no useful skills, therefore I supervise.
Call sign:Radio Silence
Call sign:Radio Silence
|
Originally Posted By Gunslinger808:
My entry... Witnessed by Winston Wolf, Desert Moon, both ARFCOM members. 100 yrds Remington 700 PSS Tasco scope (old school jap) Federal 168 SMK Front bag, no other support, to be fair, I used to use this rifle for 1000 yard shoots. I really have no real way to measure, figured it was good enough on the ARFCOM small target. Thanks for firing me up, been at least 2 years since I shot this rifle! On to the pics! The range... https://www.AR15.Com/media/mediaFiles/19372/1220distance-396544.JPG The target, 5 rounds of Fedeal Match 168 SMK*... https://www.AR15.Com/media/mediaFiles/19372/1220_shoot-396545.JPG * It seems to be loaded hotter than Military Match with 168 SMK. |
|
Originally Posted By akethan: You're missing 20 rounds. They're probably in your range bag. FWIW, this is my initial target at that range, started top left with a called cold barrel shot. Bottom right is a 5 shot string (which was the group immediately before the one in OP). And really, I need to fire 25 rounds to "prove" my ability to hit a target? Naw, accept what I did or not, I'm not wasting ammo just to be part of your group. Attached File |
I have no useful skills, therefore I supervise.
Call sign:Radio Silence
Call sign:Radio Silence
|
Originally Posted By Gunslinger808:
Naw, accept what I did or not, I'm not wasting ammo just to be part of your group. |
"I hate rude behavior in a man. I won't tolerate it." - Capt. W. F. Call, Texas Ranger
http://www.theboxotruth.com/
Shooting Stuff Is Fun
http://www.theboxotruth.com/
Shooting Stuff Is Fun
|
Originally Posted By Trollslayer:
The BFL target is the only one I can print. The other two links are dead. Would it be acceptable to make my own target with five 1" diameter black dots on it? I can convert group sizes to MOA after the shooting is done. |
|
Originally Posted By Gunslinger808: Going back and looking at the rules, you are 100% correct, my apologies. FWIW, this is my initial target at that range, started top left with a called cold barrel shot. Bottom right is a 5 shot string (which was the group immediately before the one in OP). And really, I need to fire 25 rounds to "prove" my ability to hit a target? Naw, accept what I did or not, I'm not wasting ammo just to be part of your group. https://www.AR15.Com/media/mediaFiles/19372/F4C32136-5DCC-4587-B820-829E09E1832C-396655.JPG |
"I'm a master mechanic, I can take anything apart, usually get it back together too without too many extra parts.."
| Please post questions in the other thread. See below. Thanks. - Old_Painless |
I have been asked to point out that I am LaRue Tactical's owner.
My work has been used by tens of thousands of US Military personnel,
and tens of thousands of civilian shooters - ML
My work has been used by tens of thousands of US Military personnel,
and tens of thousands of civilian shooters - ML
|
A reminder once again. This thread is for posting entries to the One MOA Challenge. If you want to talk about it or how you are preparing for it, or discuss equipment, there is another thread for that. - Old_Painless
https://www.ar15.com/forums/precision-rifles/-Official-ARFCOM-1-MOA-ALL-DAY-LONG-Challenge-Discussion-Thread/17-4880/ |
"I hate rude behavior in a man. I won't tolerate it." - Capt. W. F. Call, Texas Ranger
http://www.theboxotruth.com/
Shooting Stuff Is Fun
http://www.theboxotruth.com/
Shooting Stuff Is Fun
|
Attached File Attached File Attached File Attached File SPR Division, amannamedjed, PSA .223 Wylde SS 18” freefloat, Larue MBT, UTG 4-16x44, sock with garbanzo beans, IMI 77gr SMK OTM razor core: 0.944”, 1.135”, 0.935”, 1.402”, 1.079” = 5.495” / 5 = 1.099” avg. = 1.05 MoA. 100 yards. |
|
22lr rifle with magnified optic at 50 yards division, Redbirdxx, CZ 455 American, Yodave trigger mod, Vortex 4-16 HS-T, Harris bipod, Bradley cheek rest, Crosstac squeeze bag, Wolf Target Match. Groups: .240", .685", .716", .386", .339" = .473" average= .904 MOA
Attached File Attached File Attached File Attached File |
Reduce Spending, Limit Government, Increase Personal Freedom
|
Originally Posted By Keyst0ne:
https://photos.smugmug.com/photos/i-xCFR2RQ/0/0a66f8d7/O/i-xCFR2RQ.jpg https://photos.smugmug.com/photos/i-33GHG7s/0/ae59f8f9/O/i-33GHG7s.jpg https://photos.smugmug.com/photos/i-828qjnK/0/2ba6c249/O/i-828qjnK.jpg https://photos.smugmug.com/photos/i-6Zq4NNS/0/6c78c39a/O/i-6Zq4NNS.jpg 2012 Accuracy International AX in 6.5 Creedmoor with Factory 147gr Hornady ELD-M and Kahles 624i. Atlas bipod in front, cross-tac squeeze back in rear. Bolt division 100yd, Keyst0ne: Accuracy International AX 6.5 Creedmoor - Kahles 624i (SKMR3) - Hornady 147gr ELD-M. Groups: 0.834"/0.832"/0.411"/0.547"/0.544" = avg. 0.634" = 0.581 MOA |
|
Originally Posted By SuperJlarge:
Using an old photo, I.e, not how it was shot?? |
|
Originally Posted By JessBrie: SPR Division JessBrie. Larue Predatar barrel, geissele free float rail mil spec trigger bushnell DMR 3.5-21 in ADM mount Black Hills 77 grain TMK 401/.696/.836/.941/.911=3.785/5=.757 0.757" / 1.047 = 0.723 MOA Check me math, I missed my nap today. |
I have been asked to point out that I am LaRue Tactical's owner.
My work has been used by tens of thousands of US Military personnel,
and tens of thousands of civilian shooters - ML
My work has been used by tens of thousands of US Military personnel,
and tens of thousands of civilian shooters - ML
|
Originally Posted By LaRue_Tactical: ^^^ 0.757" / 1.047 = 0.723 MOA Check me math, I missed my nap today. |
|
Bumping this for ol' Painless ...
Sadly the post at top of this page is September of last year. |
I have been asked to point out that I am LaRue Tactical's owner.
My work has been used by tens of thousands of US Military personnel,
and tens of thousands of civilian shooters - ML
My work has been used by tens of thousands of US Military personnel,
and tens of thousands of civilian shooters - ML
|
Originally Posted By LaRue_Tactical:
Bumping this for ol' Painless ... Sadly the post at top of this page is September of last year. |
Just to add to what ever I have said above..remember mags and ammo are consumables. Continue buying and using quality consumables through out the process.
|
This is an improvement for a rifle I have already entered a couple times up above ...this time I shot with handloads instead of factory ammo. The last entry of mine that this new entry improved upon was #44.
Picture 1: Range at 100 yards Attached File Picture 2: Target with 5 groups Attached File Picture 3: Full shot with caliper (NOT adjusted for bullet size reduction) Attached File Picture 4: Picture of rifle as shot with Bipod and Rear Bag Attached File Bolt Division with magnified optics (any precision gun) at 100 yards; newBMowner: Savage Stealth, 22” 6.5CM, Vortex Viper PST 4-16x SFP, Harris Bipod, 140gr Hornady BTHP Handloads, Groups: 0.562"/1.021"/0.770"/0.732"/.671" = avg. 0.751" = 0.717 MOA |
"Free men are not equal. Equal men are not free.” -Unknown
“An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." - Lt.Col. Jeff Cooper
“An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." - Lt.Col. Jeff Cooper
|
Originally Posted By newBMowner:
This is an improvement for a rifle I have already entered a couple times up above ...this time I shot with handloads instead of factory ammo. The last entry of mine that this new entry improved upon was #44. Picture 1: Range at 100 yards https://www.AR15.Com/media/mediaFiles/119115/IMG_1819-485163.JPG Picture 2: Target with 5 groups https://www.AR15.Com/media/mediaFiles/119115/140gr_BTHP_42_2_gr_H4350-485164.JPG Picture 3: Full shot with caliper (NOT adjusted for bullet size reduction) https://www.AR15.Com/media/mediaFiles/119115/IMG_1827b-485165.JPG Picture 4: Picture of rifle as shot with Bipod and Rear Bag https://www.AR15.Com/media/mediaFiles/119115/IMG_1818b-485166.JPG Bolt Division with magnified optics (any precision gun) at 100 yards; newBMowner: Savage Stealth, 22” 6.5CM, Vortex Viper PST 4-16x SFP, Harris Bipod, 140gr Hornady BTHP Handloads, Groups: 0.562"/1.021"/0.770"/0.732"/.671" = avg. 0.751" = 0.717 MOA |
|
Originally Posted By jpgolffl:
When you use software to measure group size you need to make sure the target is square within the frame of the camera. The software is 2D so any tilt of the camera will throw the measurements off due to perspective. It will make some groups larger and some smaller depending on what you used as a scale for the software. Another software tip -- measure the longest calibration distance you can -- i.e. if you have 1" squares on your target, don't just measure one square. Measure 5-8 squares (however many you have visible in the picture) and enter that distance. This will minimize error from the positioning of your start and end points. |











. So I had to single feed today. I was also rushed for time so my results are, I feel, substandard compared to what I've shot with this rifle previously. I'll be re-shooting this one in the future.

















































