Posted: 6/19/2014 2:52:23 PM EDT
|
I tried mounting a PA Special purchase micro dot W/ riser MD-SP to the Weaver rail of my new Ruger 10/22 Tactical.
The bar of the mount wouldn't go into the groove of the rail. The bar is a tad to wide. I was able to install a Burris red dot w/o a problem. Any ideas? |
|
Quoted:
I tried mounting a PA Special purchase micro dot W/ riser MD-SP to the Weaver rail of my new Ruger 10/22 Tactical. The bar of the mount wouldn't go into the groove of the rail. The bar is a tad to wide. I was able to install a Burris red dot w/o a problem. Any ideas? The riser was made for the PIC rail on a AR. If you don;t need the riser I can probably round up a low mount that will work. The lower position might work better on the 10/22 anyway |
|
Quoted:
The riser was made for the PIC rail on a AR. If you don;t need the riser I can probably round up a low mount that will work. The lower position might work better on the 10/22 anyway Quoted:
Quoted:
I tried mounting a PA Special purchase micro dot W/ riser MD-SP to the Weaver rail of my new Ruger 10/22 Tactical. The bar of the mount wouldn't go into the groove of the rail. The bar is a tad to wide. I was able to install a Burris red dot w/o a problem. Any ideas? The riser was made for the PIC rail on a AR. If you don;t need the riser I can probably round up a low mount that will work. The lower position might work better on the 10/22 anyway Marshall, thanks for the offer. How would I go about getting a low mount from you? It's too bad Ruger didn't go with a Picatinny rail to begin with. |
|
Quoted:
Marshall, thanks for the offer. How would I go about getting a low mount from you? It's too bad Ruger didn't go with a Picatinny rail to begin with. Quoted:
Quoted:
Quoted:
I tried mounting a PA Special purchase micro dot W/ riser MD-SP to the Weaver rail of my new Ruger 10/22 Tactical. The bar of the mount wouldn't go into the groove of the rail. The bar is a tad to wide. I was able to install a Burris red dot w/o a problem. Any ideas? The riser was made for the PIC rail on a AR. If you don;t need the riser I can probably round up a low mount that will work. The lower position might work better on the 10/22 anyway Marshall, thanks for the offer. How would I go about getting a low mount from you? It's too bad Ruger didn't go with a Picatinny rail to begin with. Shoot me a email to [email protected] with you info. Be very careful removing the screws. If you strip the heads it is a bitch to get them out. I will go into more detail when you email |