Let's see your Colts. . . . (Page 4 of 45)
Nice, barrel marked C MP C, or C MP B? |
Colt probably has staplers or carpet stains in their building that have been there far longer than RRA has been in business. new-arguy, 2005
Very Nice!!!!! 
|
<font color=red><font size=3>IYAOYAS</font id=s3></font id=red>
"Ammo...Buy it cheap .....Stack it deep"
"Ammo...Buy it cheap .....Stack it deep"
You know, a couple of 39-year old twins could probably show us all a thing or two. . . . |
If Chuck Norris is late, time better slow the fuck down.
9/10 of the law is Chuck Norris.
Jesus owns and wears a bracelet that reads, "WWCND?"
9/10 of the law is Chuck Norris.
Jesus owns and wears a bracelet that reads, "WWCND?"
Brother, You aint a kiddin
|
<font color=red><font size=3>IYAOYAS</font id=s3></font id=red>
"Ammo...Buy it cheap .....Stack it deep"
"Ammo...Buy it cheap .....Stack it deep"
 As promised earlier in this thread here's my Colt 6721 with Denny's Guns Operator mid length gas system, midweight contour, chrome lined, 1/7, M4 feed ramps barrel and other upgrades. I built the upper myself and modified the rest, build completion date was 12/23/'05 and it took me nine months to complete this project. Phoenix FS LaRue 9.0 TD panels and VFG Magpul ladder rail protectors SureFire M961C tac light Aimpoint M2 with KAC QR mount KAC 300 m BUIS Norgon ambi mag catch Stag Arms ambi selector Magpul MIAD Vltor club foot modstock Specter CAR stock mag pouch BlueForce IDF style two point sling D&H mags with Wolff springs and Magpul followers and Ranger plates Thanks to the sellers at the EE, a majority of the parts are from there except the gun came from my local dealer. |
Sweet set-up Alpha!! You ought to be very proud of this baby. |
http://operationthankyou.com
Thanks, it's my pride and joy and also my SHTF gun. I expect it to be just like my six former Colts, got started with my SP-1 back in '71, which I never had any problems with all of them. My other Colt that I have now is a Colt M16A2 upper on my Colt Match Target HBAR lower (built the lower myself using Colt parts - see pic on the middle of page 5 of this thread). |
|
okay newbie here...posted all this in general discussion here and basically i'll post the pix here to go with the thread....lil info...hbar II '01 model....you can read more in my other thread....restating crap sux......btw nice cotls you all have...hope you like my so far from modded colt! my colt and G17 http://photos-096.facebook.com/n11/122/43/30404315/n30404315_30298096_9785.jpg nuttin like a lit cig on the left and an open beer on the right lol http://photos-097.facebook.com/n11/122/43/30404315/n30404315_30298097_92.jpg just leanin' http://photos-106.facebook.com/n11/122/43/30404315/n30404315_30298106_3072.jpg yaya i know tuck in the elbows....and ne one like my "aimpoint eye" as others mentioned on the other thread with this pic lol http://photos-108.facebook.com/n11/122/43/30404315/n30404315_30298108_3716.jpg hope you all like it...like i said it's mainly stock and brand new to me.....i love it so far and look fwd to getting some target pix up here soon! |
|
http://img.photobucket.com/albums/v521/pardipics/32aaa8a6.jpg http://img.photobucket.com/albums/v521/pardipics/Colt-Match-Target-2002.jpg I just got this, my one and only Colt AR. Dying to get to the range! |
Very impressive El! I especially like the consistency of identical accessories/mods. All of my Colt carbines (4) sport TD battle grips. |
Failure has far too many fathers.
-MMB
-MMB
Thanks, brother. Don't know when I might have to use one. Need to know that everything's the same, functionally speaking. . . |
WWPRD
|
Here is my Colt 6920 transformed by MSTN: Factory New Colt 6920. Immediately removed side sling swivel and sent the upper to Wes for LaRue 7.0 with installation. Specs are: - LaRue 7.0 - KAC rail covers - KAC rail QD sling swivel mount - KAC rear M4 QD sling swivel mount - Troy buis - Aimpoint ML2 in LaRue standard mount (Thanks CapnCrunch) - Tango Down vertical foregrip - Surefire E2D in VLTOR Scout Mount - Now has a Tangodown battle grip instead of the standard A2 pistol grip - Giles two-point sling from the Wilderness with QD swivels  |
 The family: - Colt 6551 with 6731 upper and M4 enhanced stock - Colt 6921/LaRue/Aimpoint/Troy ( MSTN'ized) - Colt 614 with M4 SOCOM upper, M4 enhanced stock, Knights QD swivels - Colt M16 with LMT 10" upper, Knights RASII, chopped Dieter grip, Magpull MIAD, Knights QD swivels (MSTN'ized)   
|
Show off 
|
June 1st, 2018
here are my favorites, i know its wrong, but they are my favorites. keep in mind, they are still under construction. 6721 and m1991a1 i just picked up the eotech at the the kenner,la. gunshow. it has not been sighted in yet. thinking about a MAD buis.  this is the one they will be prying from my cold lifeless fingers. i have had it for about 10 yrs. a little work done @clark's custom guns. it's going back next week for a clark hammer and oem colt commander grip safety. someday, it is going to novak's for french borders, hand matted slide, front strap, and msh. this one is my hierloom.   |
Now that is a family photo, Josh Very impressive!! |
http://operationthankyou.com
Colt 6450 w/ trijicon Reflex II and Glock 19: Colt 6920 w/ 14.5'' SOCOM barelled upper and extended A2 flash hider (assembled by Denny Fouch from GTS), KAC RAS, Compact ACOG:  Crappy indoor photo of 6721 w/ LaRue lo-pro gas block, DD 12.0 (also assembled by Denny), Harris bi-pod, ACOG TAO1NSN. (current configuration includes Troy front and rear BUIS'.) 
|
Failure has far too many fathers.
-MMB
-MMB
Nice Gov't Carbine. |
Failure has far too many fathers.
-MMB
-MMB
My Colt M16 recently reanodized in Colt Gray by Victor at US Anodizing:      
|
Josh, Thanks for sharing.......  The anodize job looks great.... |
Failure has far too many fathers.
-MMB
-MMB
Thanks, Buddy. I am really pleased with the work done by Victor at US Anodizing. He is an artist. |
Where did you get the case, very nice. |
And I will bless them that bless ME :-)
Joined:
Mar 2004
Posts:
11923
EE: 100% (353)
VA, USA
|
just got her. When I was in NY I had 3 complete preban colts: a) sporter HBAR, b) SP1 pencil 20" 1/12, c) 9mm carbine, but sold them to NY'ers before I moved to a free state. Was in the market for a lightweight KISS rifle, and came into a colt. she's spreban and easily 99% condition maybe 100 rounds through her.    one accessory and one accesory only.... a CQB/Specter AR carbine sling: 
|
I'm lookin' for a nice Jewish virgin...............ian
____________________
Sweet Fancy Moses
____________________
It's 106 miles to Chicago, we've got a full tank of gas, half a pack of cigarettes, it's dark, and we're wearing sunglasses
____________________
Sweet Fancy Moses
____________________
It's 106 miles to Chicago, we've got a full tank of gas, half a pack of cigarettes, it's dark, and we're wearing sunglasses
And I will bless them that bless ME :-)
Joined:
Mar 2004
Posts:
11930
EE: 100% (353)
VA, USA
really? The thing is gorgeous. Lemme check the real serial number and see when its made.....
|
I'm lookin' for a nice Jewish virgin...............ian
____________________
Sweet Fancy Moses
____________________
It's 106 miles to Chicago, we've got a full tank of gas, half a pack of cigarettes, it's dark, and we're wearing sunglasses
____________________
Sweet Fancy Moses
____________________
It's 106 miles to Chicago, we've got a full tank of gas, half a pack of cigarettes, it's dark, and we're wearing sunglasses
Here's a couple of crappy photos of my recce-ish 6721. It has a Larue lo-pro gas block, Daniel Defense 12.0 rail, Smith Vortex FH, Troy front and rear buis', ACOG TAO1NSN, KAC VFG, TD battle grip and Harris 6-9'' bipod with pod-loc. Here is a photo without the ACOG and the buis' deployed....  I am considering fluteing (sp) underneath the gas tube to save some weight cause she is pretty heavy. |
Failure has far too many fathers.
-MMB
-MMB
