Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 2/16/2006 6:13:31 AM EST
OK I'm a little upset, but dealing with it. I picked up a Mega lower based on hearing mostly good things about them and wanted a lower marked 'multi' for caliber. Working on SBR'ng, having it engraved, and the finishe begins flaking off!! So I've sent an e-mail to the dealer I got it from to see if can't work it out but Grrrrrrrrr, frustrating. Guess from now on I'll stick with RRA.
Link Posted: 2/16/2006 6:19:36 AM EST
Link Posted: 2/16/2006 6:38:52 AM EST
yes I know. I saw his posts in the potential GB thread. I'd heard more good then bad to sway me to try it out for saving a little cash. Now it's just more time and headache.
Link Posted: 2/16/2006 6:40:37 AM EST
Link Posted: 2/16/2006 6:48:14 AM EST
so far the dealer has been great up to this point. I'm keeping my fingers crossed here.
Link Posted: 2/16/2006 6:48:37 AM EST
I've had some more trouble with the last mega I've done....which is a shame because I like the machining marks and finish (my two lower pet peevs).

But they are too out of spec, finish is too thick, and alot of times won't drop mags. I've got a Bushy lower I have the SBR paperwork for.

My new favorite cheap lower is DPMS!

But if you can, buy bushy and anything is better then Stag.
Link Posted: 2/16/2006 7:00:09 AM EST
[Last Edit: 2/16/2006 7:00:19 AM EST by Noxspector]
What did happen to the lower GB? I need some.
Link Posted: 2/16/2006 7:04:41 AM EST
The manufacture wasn't up to par IMO, the second choice was more expensive and didn't offer large group discounts other then free shipping($140 per lower).

I'm still looking for an other choice.
Link Posted: 2/16/2006 7:11:10 AM EST

Originally Posted By WS4LIF:
I've had some more trouble with the last mega I've done....which is a shame because I like the machining marks and finish (my two lower pet peevs).

But they are too out of spec, finish is too thick, and alot of times won't drop mags. I've got a Bushy lower I have the SBR paperwork for.

My new favorite cheap lower is DPMS!

But if you can, buy bushy and anything is better then Stag.



Yeah I like there markings, like the multi marked for caliber, but am not impressed with this.
Link Posted: 2/16/2006 7:47:31 AM EST
Link Posted: 2/16/2006 7:58:19 AM EST
Still expensive and not a custom job.
Link Posted: 2/16/2006 9:15:46 AM EST
Link Posted: 2/16/2006 9:24:01 AM EST
Link Posted: 2/16/2006 9:30:34 AM EST
Link Posted: 2/16/2006 9:38:28 AM EST

Originally Posted By Ellery_Holt:

Link Posted: 2/16/2006 9:44:34 AM EST
[Last Edit: 2/16/2006 9:45:47 AM EST by Cape_hunter]

Originally Posted By munkalido:

Originally Posted By Ellery_Holt:





Were you driving your "other" car when you hit it?

Link Posted: 2/16/2006 9:49:19 AM EST
[Last Edit: 2/16/2006 11:14:52 AM EST by WS4LIF]
You mean this one:

Link Posted: 2/16/2006 10:02:15 AM EST
well update- the dealer I got it from pretty much said well you tried angraving and if it's flawed in the anodizing that it's Mega's fault. So I can either try to deal with mega, which some have said may be an issue, or just take my flaky receiver as a lesson and buy quality next.
Link Posted: 2/16/2006 10:03:18 AM EST

Originally Posted By WS4LIF:
Still expensive and not a custom job.



Well, subtract what a transfer would cost and it doesn't look so bad.
It has the attributes that were mentioned - Multi Caliber, well made, and decent finish.

It wasn't custom for me, but it was for Cloud Mountain Armory.

The real avantage for me is that I can decide at 2pm that I want a lower, drive down to Newberg and be walking out of the store with it in my hand by 2:45pm -- I will pay a bit extra for that.
Link Posted: 2/16/2006 10:39:28 AM EST
[Last Edit: 2/16/2006 10:44:20 AM EST by munkalido]

Originally Posted By WS4LIF:
You mean this one:

stunnner65.tripod.com/sitebuildercontent/sitebuilderpictures/392_jpg.jpg







Link Posted: 2/16/2006 1:40:44 PM EST
Not that the thread isn’t a little off track already, but has anybody tried a Noveske N4 receivers, ya know, support the home town guys and all.
Link Posted: 2/16/2006 1:45:58 PM EST

Originally Posted By WS4LIF:
You mean this one:

i6.photobucket.com/albums/y242/martiniup/65.jpg





I don't know, but I'd have the frame looked at if I were you.
Link Posted: 2/16/2006 1:50:34 PM EST

Originally Posted By ch139:
Not that the thread isn’t a little off track already, but has anybody tried a Noveske N4 receivers, ya know, support the home town guys and all.



It's just a FAG, sorry, STAG
Link Posted: 2/16/2006 2:09:19 PM EST
OK well I went from mad to completely pissed. Mega flat out refuses to do anything about this. shatty product and no support for their product. The dealer kind of washed there hands of it, which kind of pisses me off because they havepretty good prices. Yeah it's not there fault but it's nice when people stand behind there products they sale. It's all a learning experience and well WS4LIF was right about shatty a$$ mega products. In the end I learned yes all lowers are supposed to be created fairly equal, but they aren't. Stick with good and reputable. All of this friggin headache to save $20. Now I'm $90 in the hole.
Link Posted: 2/16/2006 2:18:29 PM EST

Originally Posted By WS4LIF:

Originally Posted By ch139:
Not that the thread isn’t a little off track already, but has anybody tried a Noveske N4 receivers, ya know, support the home town guys and all.



It's just a FAG, sorry, STAG



And why do you despise Stag so much? Or is this some kind of sick joke.
Link Posted: 2/16/2006 2:19:15 PM EST
[Last Edit: 2/16/2006 2:19:34 PM EST by WS4LIF]
Thats why I always wonder when people go with brand X lower parts kit over RRA which is $8 more.....???

But, luckly there are other choices. And someone will buy that lower from you (I'll give ya $25).

Link Posted: 2/16/2006 2:21:28 PM EST
[Last Edit: 2/16/2006 2:22:15 PM EST by WS4LIF]

And why do you despise Stag so much?


I find them to be of low quality.
I find the finish too ruff and not to my liking.
I find the logo so rediculously gay I can't stand looking at it another minute.
I find the fact that all these "new" lowers are just rebadged Queer Deer.
I find all the support more fuel for my anti-Stag fire!
Link Posted: 2/16/2006 2:24:24 PM EST
Link Posted: 2/16/2006 2:25:10 PM EST

Originally Posted By WS4LIF:
Thats why I always wonder when people go with brand X lower parts kit over RRA which is $8 more.....???

But, luckly there are other choices. And someone will buy that lower from you (I'll give ya $25).



Yeah I have an offer for $75, I'll probably just keep the damn thing so at least I have something to show for it. Hey if there's ever a ban again I gots a nice POS err I mean umm Mega lower for sale!!!
Link Posted: 2/16/2006 2:28:47 PM EST

Why you gots to be such a hater????



Link Posted: 2/16/2006 2:46:27 PM EST

Originally Posted By WS4LIF:

And why do you despise Stag so much?


I find them to be of low quality.
I find the finish too ruff and not to my liking.
I find the logo so rediculously gay I can't stand looking at it another minute.
I find the fact that all these "new" lowers are just rebadged Queer Deer.
I find all the support more fuel for my anti-Stag fire!



You have got to be kidding.

Oh well, some people are just the way they are and you can't change them. More Stag for me.
Link Posted: 2/16/2006 3:22:31 PM EST
I don't like stag simply based on there logo. Oh well though.
Link Posted: 2/16/2006 3:37:03 PM EST
Quite honestly it was the logo on both Stag and Mega that made me look around for alternatives.
Both would sell MUCH better with no logo at all (IMHO).

Maybe this is a business opportunity, and I should contract CMT to produce some clean, no logo lowers and make my fortune selling them ...
Link Posted: 2/16/2006 3:41:11 PM EST
well I liked Megass' lower, but they are absolute sh!t. sorry but never again.
Link Posted: 2/16/2006 5:39:10 PM EST
Link Posted: 2/16/2006 5:56:55 PM EST
Do you guys honestly pay that much attention to the rollmark??
Link Posted: 2/16/2006 6:06:34 PM EST
Link Posted: 2/16/2006 8:50:44 PM EST

Originally Posted By WS4LIF:
The manufacture wasn't up to par IMO, the second choice was more expensive and didn't offer large group discounts other then free shipping($140 per lower).

I'm still looking for an other choice.



$140?!? for an off-brand kit-gun lower???

I think Keith's had RRA lowers for $145 at the last fun show...
Link Posted: 2/16/2006 9:11:30 PM EST
Custom engraded lower.
Link Posted: 2/16/2006 9:23:41 PM EST

Originally Posted By WS4LIF:
Thats why I always wonder when people go with brand X lower parts kit over RRA which is $8 more.....???

But, luckly there are other choices. And someone will buy that lower from you (I'll give ya $25).




Because some of us don't like RRA's LPKs.

Sorry to hear about the Mega lower problem. I have two that are in fine shape. One just finally got SBR'd.

What's most disturbing, however, is the lack of customer service you received from Mega.
Link Posted: 2/16/2006 10:20:28 PM EST


I think Keith's had RRA lowers for $145 at the last fun show...



bigbore has them for $175 with standard LPK installed.
Link Posted: 2/17/2006 4:07:43 AM EST
I'm relly kind of surprised by this. I have a Stinger lower on my rifle build that I bought~2 years ago, and it is a nicer receiver than my Bushy. Nicer machining, finish, and no problems of any kind with dimensional tolerences that I can find (it works).

Nick
Link Posted: 2/17/2006 5:36:16 AM EST

Originally Posted By NoAim:

What's most disturbing, however, is the lack of customer service you received from Mega.



and this is my biggest gripe. if a company, and dealer, can't stand behind a product how good are they really.
Link Posted: 2/17/2006 6:06:30 AM EST
I gave up on warrenties a LOOOONG time ago.

Link Posted: 2/17/2006 6:10:44 AM EST
Well maybe this will be a lesson learned for me then. Wit sportbikes every company I've dealt with and dealer has stood behind there products 100%. It's sad to see the same can't be said here.
Link Posted: 2/17/2006 3:55:43 PM EST
[Last Edit: 2/17/2006 3:57:17 PM EST by ian187]

Originally Posted By WS4LIF:

And why do you despise Stag so much?


I find them to be of low quality.
I find the finish too ruff and not to my liking.
I find the logo so rediculously gay I can't stand looking at it another minute.
I find the fact that all these "new" lowers are just rebadged Queer Deer.
I find all the support more fuel for my anti-Stag fire!



I have your back on this. CMT is better about machining off the forging marks but I have encountered a lot of tolerance and finish issues with them. My preference is anything that comes from LAR, which includes recent DPMS, BM, Ameetec, and a couple others.

I have received RRA and CMT receivers that were too tight and had terrible finishes but I have never received an LAR receiver that was anything but identical to the next. I know it sounds weird but LAR puts out the same exact product every single time.

And for the record, I would rather wait on an Ameetec than buy an in stock CMT or Mega.



Top Top