Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
12/1/2008 9:12:22 PM EDT
The USGI\government model recoil spring rate is 16#. Will going to a stronger spring reduce felt recoil? What's the upper end for reliability with 230 ball ammo as far as the spring rate goes? TIA for any information.
12/2/2008 4:41:25 AM EDT
[#1]
You can go to as high as 22 if you want.   Although the slide returns home much faster and mimics a flatter shooting gun it is more violent.

I run a 14 in my .45, no shok buffs, no recoil master.  Just spring and guide rod.  It's very flat shooting.  12 is ok too, but a little harsh when the slide hits the frame.  16 is a great compromise.
12/2/2008 3:46:54 PM EDT
[#2]
I prefer a 18-19lb spring in my Govt models. I sure wouldn't go higher than 22lbs, personally.

My .o2
12/2/2008 5:44:54 PM EDT
[#3]
18# if you are only shooting 230 ball works very well, I would not go heavier for reliability.
12/2/2008 9:36:36 PM EDT
[#4]
Thanks for all the info. I need numerous springs for numerous guns so I think it's time to give Wolff a call.