Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 3/4/2006 3:52:35 PM EST
Are the spent shells supposed to be ejected straight up and back? I was just at the range today and I was getting hit in the back of the neck by brass!
Link Posted: 3/4/2006 8:36:03 PM EST
The P3AT tends to eject brass rather vigorously. As the recoil springs wear, it can get worse. Many call Kel-Tec and just ask for replacements after 500 rounds or so. They are generally sent for free if yuo ask for a gunsmith.hitnot the same thing.
Link Posted: 3/5/2006 7:59:59 PM EST
There is a good possibility that I was limp wristing it. I put several hundred rounds through as a break in. Some of those were rapid fire(ouch) so that could be the reason for it.

Only had one failure to chamber when it was really dirty so I see no reason to worry about its reliability.
It sure is a lot of fun but hard on the wrist after the first 200 rounds
Link Posted: 3/5/2006 10:03:44 PM EST
The FTF issue was probably just crud (as you said), but a new set of springs might help, especially if you are putting 200 rounds/session through the little guy. I love mine.
Link Posted: 3/8/2006 6:21:46 PM EST
I get a lot of brass going up and behind me as well.
Top Top