Posted: 11/30/2010 4:01:07 AM EDT
|
Hi guy's. I was wondering if anyone can offer some advise about a problem with my new 94 w/4"barrel. I bought the gun a few weeks ago to use as a trap line gun. I took it to the range and found it to be very tight. By this I mean that the tolerances between the cylinder and the frame/forcing cone are tight. The cylinder was tough to close and while shooting the cylinder would bind up. After shooting it a while approx 200 rounds she seems to have freed up bit. What I am getting now is when I get to the last round the cylinder binds up. This makes no sense to me. I also experienced a lot of misfires at first but, that self corrected the more I shot it. I now have no misfires. Any advise / suggestion would be greatly appreciated.
Thanks Mike |
| I bought a model 94 blued for my son a few years ago and there was enough clearance for the cylinder to rotate. Instead of sending it back I took a little metal off the forcing cone with a file. It hasn't hung up since but it still doesn't have a very good double action pull. We had a few failure to fire but that seemed to be as much ammo related as anything with the revolver. |