Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Page Handguns » H&K
Site Notices
1/25/2018 7:38:29 AM
Posted: 3/6/2006 4:45:34 PM EST
Hey there,

I am having a barrel cleaning issue. I have a uspc40. Ive shot probably about 8000 rounds through it in about 4 years of ownership. Within the last few cleans i am having a hard time removing all the fouling from the barrel along the rifling*.(might not be the right terminology) Also the feed ramp is slightly discolored on the R side of the ramp. Does anyone have any suggestion on how to better clean the barrel? Any solutions you would recommend?

I am currently cleaning it with hoppes solution and following it up with hoppes gun oil.

Brian
Link Posted: 3/6/2006 6:35:01 PM EST
soak the barrel in hoppes overnite and see how that works.
Link Posted: 3/6/2006 9:48:51 PM EST
My feed ramp seems to build up on the right side as well. I wonder what that's all about? Anyway, last night as I was cleaning it, I used a bore brush to clean off the caked on crud on the ramp. Worked fine. I wonder if someone will tell me that's a bad thing to do though.
Link Posted: 3/7/2006 7:21:36 AM EST
yea i tried using a bore brush without much success on mine. I am going a gun show on friday, i am going to try and pick up some new brushes etc..
Link Posted: 3/7/2006 8:28:36 AM EST
[Last Edit: 3/7/2006 8:29:01 AM EST by gudel]
never had problems cleaning my 4 HK's. try using a brand new bronze/phosphor brush at the right caliber. You may want to try snake bore, run it through after you're done shooting.

I also used Mpro7. combined with snake bore, it really did clean the lead out! i tried hoppes 9. it doesn't do shit.
Link Posted: 3/7/2006 9:16:30 AM EST

Originally Posted By gudel:
never had problems cleaning my 4 HK's. try using a brand new bronze/phosphor brush at the right caliber. You may want to try snake bore, run it through after you're done shooting.

I also used Mpro7. combined with snake bore, it really did clean the lead out! i tried hoppes 9. it doesn't do shit.



thanks for the tips, i am planning on picking up the mpro7 on friday, ive heard good things about it. plus i am sick of getting high off the hoppes fumes.....
Link Posted: 3/7/2006 3:33:44 PM EST
Might consider the electronic bore cleaner that's out now? I can't remember the name out, Outers Foul Out or something?????

Also, don't use a bristle type bore brush, use the new style tornado type. It works 100 times better.

My .o2
Link Posted: 3/7/2006 5:33:15 PM EST
[Last Edit: 3/7/2006 5:50:06 PM EST by NewtoAR15s]

Originally Posted By BobCole:
Might consider the electronic bore cleaner that's out now? I can't remember the name out, Outers Foul Out or something?????

Also, don't use a bristle type bore brush, use the new style tornado type. It works 100 times better.

My .o2




Well, ive soaked the barrel in hoppes for a few hours. It removed some of the fouling but not all of it. hinking.gif
thanks. Im going to get some mpro7 as well as tornado brushes on friday. If i had 140 bucks id order that electric bore cleaner. looks pretty cool.
Link Posted: 3/9/2006 7:50:44 AM EST
What color are the patches coming out? If grey to black it's just carbon and the foul out won't do anything. Just keep scrubbing. If it's green/blue, it's copper and you need to use some copper solvent, or the Foul Out. I'm assuming that you haven't been shooting lead. If you have, then you need to use a mechanical or electronic means to remove it. The Tornado brushes grab and pull out the lead usually, and the Foul Out removes it as well.
Link Posted: 3/9/2006 10:04:10 AM EST
You guys really think the coil bore brushes are better than the bristle brushes?
Link Posted: 3/10/2006 12:02:02 AM EST
the fouling has been grey to black, ive pretty much got the barrel cleaned at this point with most of the fouling gone. I have been shooting winchester white box through it, which i am sure is not the cleanest ammo
Link Posted: 3/10/2006 2:46:48 AM EST
Old toothbrushes have worked well enough for me. I love that feed ramp shine
Link Posted: 3/10/2006 5:01:41 PM EST

Originally Posted By choochboost:
You guys really think the coil bore brushes are better than the bristle brushes?




Absolutely! Lots more surface contact to the bore over the bristle type.
Link Posted: 3/10/2006 6:12:25 PM EST
I need a new brush and was wondering about that.
Link Posted: 3/11/2006 6:56:40 PM EST
You need two solvents:

Shooter's choice powder solvent

Sweet's 7.62

Run em both through. Rinse and repeat. That sweet's will eat up copper like you wouldn't believe.

A little JB Bore Paste never hurt things either. If you really need to go hardcore, get some brake cleaner (seriously.)

With this combination, you will clean your barrel.
Link Posted: 3/11/2006 7:35:54 PM EST
Thanks, you know i keep on hearing about this brake cleaner thing.......... non chlorinated right?
Link Posted: 3/11/2006 7:38:03 PM EST
[Last Edit: 3/11/2006 7:38:39 PM EST by ORinTX]

Originally Posted By NewtoAR15s:
Thanks, you know i keep on hearing about this brake cleaner thing.......... non chlorinated right?



Yeah, but I'd try Sweet's 7.62 first. And be sure to keep the room well ventilated...that stuff is potent. You could probably get a good buzz if you spent much time using it.
Page Handguns » H&K
Top Top