Posted: 1/11/2014 12:32:39 PM EDT
|
Gent's,
I received this in trade and would like to know a little more info & value on it. Here's a brief overview of what I have (correct me if I'm wrong). Glock 22 RTF2 Frame, Lone Wolf long slide, Lone Wolf long 9mm ported barrel, Dawson Fiber Optic front sight, Dawson Adjustable black rear sight, either laser or, acid etched slide & barrel, 3 - Standard Cap magazines w/Vickers base plates and finally the trigger currently breaks at 3.5lbs w/a super short reset (it's the lightest Glock trigger I've ever felt). I believe this pistol was set-up for 3 gun? Thanks in advance! 
|
|
Quoted:
Looks like a really sweet setup. Are you sure it was a .40 frame? They did make some 17's with the RTF frame. Does it have the 9mm ejector or the .40 one? (.40 is straight, 9mm has a bend in it) AJE - thanks for the input...yes, I called Glock + confirmed on Glock Talk (based on the serial number prefix): G-22RTF2 - March 2009 - 3rd Gen, the ejector has a slight bend #336. I'm just not sure where to place the value on it as, I may either sell or trade? Thanks again! |
|
Quoted:
AJE - thanks for the input...yes, I called Glock + confirmed on Glock Talk (based on the serial number prefix): G-22RTF2 - March 2009 - 3rd Gen, the ejector has a slight bend #336. I'm just not sure where to place the value on it as, I may either sell or trade? Thanks again! Quoted:
Quoted:
Looks like a really sweet setup. Are you sure it was a .40 frame? They did make some 17's with the RTF frame. Does it have the 9mm ejector or the .40 one? (.40 is straight, 9mm has a bend in it) AJE - thanks for the input...yes, I called Glock + confirmed on Glock Talk (based on the serial number prefix): G-22RTF2 - March 2009 - 3rd Gen, the ejector has a slight bend #336. I'm just not sure where to place the value on it as, I may either sell or trade? Thanks again! 336 ejector corresponds to a 9mm frame. As in if it is a 336 ejector, the ejector itself is NOT for .40 cal BE CAREFUL. HTR. |
|
Quoted:
336 ejector corresponds to a 9mm frame. As in if it is a 336 ejector, the ejector itself is NOT for .40 cal BE CAREFUL. HTR. Quoted:
Quoted:
Quoted:
Looks like a really sweet setup. Are you sure it was a .40 frame? They did make some 17's with the RTF frame. Does it have the 9mm ejector or the .40 one? (.40 is straight, 9mm has a bend in it) AJE - thanks for the input...yes, I called Glock + confirmed on Glock Talk (based on the serial number prefix): G-22RTF2 - March 2009 - 3rd Gen, the ejector has a slight bend #336. I'm just not sure where to place the value on it as, I may either sell or trade? Thanks again! 336 ejector corresponds to a 9mm frame. As in if it is a 336 ejector, the ejector itself is NOT for .40 cal BE CAREFUL. HTR. Interesting, can the ejectors be replaced on frames? I just double checked the serial number prefix and ejector - my info is correct as stated above. I believe this was a full custom build pistol by a Glock Certified Armorer/Gunsmith specifically for 3 gun comps. 
|
|
Quoted:
Interesting, can the ejectors be replaced on frames? I just double checked the serial number prefix and ejector - my info is correct as stated above. I believe this was a full custom build pistol by a Glock Certified Armorer/Gunsmith specifically for 3 gun comps.
Quoted:
Quoted:
Quoted:
Quoted:
Looks like a really sweet setup. Are you sure it was a .40 frame? They did make some 17's with the RTF frame. Does it have the 9mm ejector or the .40 one? (.40 is straight, 9mm has a bend in it) AJE - thanks for the input...yes, I called Glock + confirmed on Glock Talk (based on the serial number prefix): G-22RTF2 - March 2009 - 3rd Gen, the ejector has a slight bend #336. I'm just not sure where to place the value on it as, I may either sell or trade? Thanks again! 336 ejector corresponds to a 9mm frame. As in if it is a 336 ejector, the ejector itself is NOT for .40 cal BE CAREFUL. HTR. Interesting, can the ejectors be replaced on frames? I just double checked the serial number prefix and ejector - my info is correct as stated above. I believe this was a full custom build pistol by a Glock Certified Armorer/Gunsmith specifically for 3 gun comps.
Yes, they can. IF your data is correct, yours has been. Edit. HTR. |
|
Quoted:
336 ejector corresponds to a 9mm frame. As in if it is a 336 ejector, the ejector itself is NOT for .40 cal BE CAREFUL. HTR. Quoted:
Quoted:
Quoted:
Looks like a really sweet setup. Are you sure it was a .40 frame? They did make some 17's with the RTF frame. Does it have the 9mm ejector or the .40 one? (.40 is straight, 9mm has a bend in it) AJE - thanks for the input...yes, I called Glock + confirmed on Glock Talk (based on the serial number prefix): G-22RTF2 - March 2009 - 3rd Gen, the ejector has a slight bend #336. I'm just not sure where to place the value on it as, I may either sell or trade? Thanks again! 336 ejector corresponds to a 9mm frame. As in if it is a 336 ejector, the ejector itself is NOT for .40 cal BE CAREFUL. HTR. It has a 9mm barrel and slide. |
|
Quoted:
It has a 9mm barrel and slide. Quoted:
Quoted:
Quoted:
Quoted:
Looks like a really sweet setup. Are you sure it was a .40 frame? They did make some 17's with the RTF frame. Does it have the 9mm ejector or the .40 one? (.40 is straight, 9mm has a bend in it) AJE - thanks for the input...yes, I called Glock + confirmed on Glock Talk (based on the serial number prefix): G-22RTF2 - March 2009 - 3rd Gen, the ejector has a slight bend #336. I'm just not sure where to place the value on it as, I may either sell or trade? Thanks again! 336 ejector corresponds to a 9mm frame. As in if it is a 336 ejector, the ejector itself is NOT for .40 cal BE CAREFUL. HTR. It has a 9mm barrel and slide. Right. My bad. Then it is gtg. HTR. |
