G19 in the SF communities. (Page 39 of 45)
|
Originally Posted By stoner63a: https://www.ar15.com/media/mediaFiles/43902/1000007503_jpg-3429187.JPG The Army changed its definition of "modular" when the saw what the SIG contract bid would be. A Glock 19 capable of changing the rear grip sizes to better fit hands, the accessory rail on dust cover and ability fit night sights all met the specifications written up to justify the M17 M18 MHS. And how did SIG get a variance from BATFE to classify the FCU as the main component of the P320 system? Glock could have done the same thing with the TMH housing to allow Armorers to change out the commonly referred to as the "receiver" lower frame as damage rendered them inop without having to totally code out a handgun. The Army did not change the definition of modular. Glock's entry, the G19X, met all the requirements but wasn't selected to continue to the final stage of the competition because Sig had a "slight technical advantage" and had a total contract cost just over half of Glock's. |
|
The SIGs issued to the Army (and others for that matter) cost around $100-150.00 to the government. I have seen multiple pictures of frames shearing in half, rear sights flying off (including my own non-military XCarry Full), and a myriad of other issues. To say that SIG had an "advantage" is basically saying they had a cheaper option. Therefore the military took it. Our soldiers would have been better just using standard Glock 19s or the newer Glock 47s. |
|
Originally Posted By tacdog34: The SIGs issued to the Army (and others for that matter) cost around $100-150.00 to the government. I have seen multiple pictures of frames shearing in half, rear sights flying off (including my own non-military XCarry Full), and a myriad of other issues. To say that SIG had an "advantage" is basically saying they had a cheaper option. Therefore the military took it. Our soldiers would have been better just using standard Glock 19s or the newer Glock 47s. We can blame the FAR for this stupidity |
|
Cag Glocks: Attached File Clone Cag Glock: Attached File |
IG @bayou_bengal-rifles
|
Attached File I picked up this magwell, would it be correct for a CAG clone? If so, what else to add? Thanks. |
|
Originally Posted By Neogirevik1: https://www.ar15.com/media/mediaFiles/45824/IMG_1870_jpeg-3436786.JPG I picked up this magwell, would it be correct for a CAG clone? If so, what else to add? Thanks. |
IG @bayou_bengal-rifles
|
X200, I have one laying around that needs a G22. Do you know if they still use them or is it all X300/TLR now? |
Taxation without representation
|
You all see these? OEM MOS Gen 3 slides |
Every normal man, at times, must be tempted to spit on his hands, hoist the black flag, and begin slitting throats.
|
They have front serrations and the stamping on the slide looks very Gen5, I don't think cloner boners will be interested. |
|
Originally Posted By spadedracer: They have front serrations and the stamping on the slide looks very Gen5, I don't think cloner boners will be interested. Originally Posted By spadedracer: They have front serrations and the stamping on the slide looks very Gen5, I don't think cloner boners will be interested. It's why I didn't post THIS in this thread. Neat for general Glock owners and Glock clone builders, not so much for "Clone" builders here. |
|
Somebody saw them. Everything out of stock 
|
"A job? Why would you do that when you can sit around all day and play cards and drink good whiskey?"- Chester, Gunsmoke
|
Originally Posted By LsuJon: Who doesn't love when a Green Beret does marketing  https://www.ar15.com/media/mediaFiles/316069/IMG_0263_jpeg-3337488.JPG https://www.ar15.com/media/mediaFiles/316069/IMG_0243_jpeg-3337490.JPGhttps://www.ar15.com/media/mediaFiles/316069/IMG_0244_jpeg-3337491.JPG @LsuJon Out of curiosity, do you, by chance, have any information on that fanny pack? |
I can’t stand it to think my life is going so fast and I’m not really living it.
|
Originally Posted By LsuJon: Cag Glocks: https://www.ar15.com/media/mediaFiles/316069/IMG_2685_jpeg-3436481.JPG Clone Cag Glock: https://www.ar15.com/media/mediaFiles/316069/IMG_2706_jpeg-3436482.JPG You got me to buy a G35 upper.  I’m curious to see how the optic and dovetail mount hold up over time.
|
|
I rarely use the Glock anymore but figured I'd share it Attached File |
| Is there a list (reference) somewhere for the different Glocks and what parts/accessories they use? Similar to how if you look here on arfcom in the SOPMOD block II or URGI discussion there is a list of the gun and parts necessary to build a clone. |
|
Originally Posted By ltong29: https://i.ibb.co/NdCv7K8F/PXL-20250129-001452330.jpg T.H.E. Accessories magwell would be correct for this one right? I was in a bidding war on a ALG Flared and I couldn't stomach going over $300 
|
IG @bayou_bengal-rifles
|
Dawson never has their adjustable sights with tritium in stock. Anyone know the correct sights for a CAG G35? Is it the fiber optic front and black rear or fiber front and back? Attached File |
|
Originally Posted By StealthGuy: Dawson never has their adjustable sights with tritium in stock. Anyone know the correct sights for a CAG G35? Is it the fiber optic front and black rear or fiber front and back?https://www.ar15.com/media/mediaFiles/366755/IMG_7284_jpeg-3483631.JPG Cag photos I’ve seen are black/black or black/fiber; I would assume much like the 1911 sights(bomars vs the novaks) there is some level of operator preference so not really a standard. Just guessing though |
 I did not know this aimpoint mount existed, and now looks discontinued. any leads on where to find one? Ebay? I have a micro that needs a home |
Don't be so open-minded that your brains fall out.
General education should not be mere job training, but training in how to be fully human.
General education should not be mere job training, but training in how to be fully human.
|
Originally Posted By MRW: I did not know this aimpoint mount existed, and now looks discontinued. any leads on where to find one? Ebay? I have a micro that needs a home Originally Posted By MRW: I did not know this aimpoint mount existed, and now looks discontinued. any leads on where to find one? Ebay? I have a micro that needs a home I think this may be what you’re looking for. Aimpoint Acro Rear Sight Adapter Plate |
|
Originally Posted By MRW: I did not know this aimpoint mount existed, and now looks discontinued. any leads on where to find one? Ebay? I have a micro that needs a home Originally Posted By MRW: I did not know this aimpoint mount existed, and now looks discontinued. any leads on where to find one? Ebay? I have a micro that needs a home Or maybe this one. It says out of stock but I didn’t see where it was discontinued. Micro Series Glock Rear Sight Adapter |
|
Originally Posted By MRW: I did not know this aimpoint mount existed, and now looks discontinued. any leads on where to find one? Ebay? I have a micro that needs a home  |
Make sure you tell guys that the 1911 is a pain in the ass - Larry Vickers
|
Originally Posted By GrizzlyAtlas: Found a couple of photos of marines with the M007, don't think I have seen them in the wild before. First one I find really interesting as it's an SRT member: https://64.media.tumblr.com/795c0a99e5577905314db4e1687cce55/89f9b6cd4c10ac41-c0/s2048x3072/1c24eb20982f22b0f39c1e7bf1f1a3f38821fd54.jpg The second one is of a CID investigator, which fits in the role the M007 was acquired for. https://64.media.tumblr.com/709cf905f61068bb64601d1fc72310bf/89f9b6cd4c10ac41-37/s2048x3072/88ceaeb129f6fc916a86bc78e53c813959b2d928.jpg Carrying in a PHLSTER ENIGMA...interesting. |
Every normal man, at times, must be tempted to spit on his hands, hoist the black flag, and begin slitting throats.
|
Attached File IG post for SOCOM and SOCSOUTH today. |
Luke 2:14
|
Originally Posted By WittyTiger: Finally found a usa gen4 26. Father and son combo https://i.imgur.com/SXkW8kl.jpeg I've got a USA made g4 25 in EE if anyone is looking to clone. |
Joined:
Jul 2023
Posts:
53
EE: 0% (0)
OH, USA
|
Originally Posted By Pleaforwar: https://www.ar15.com/media/mediaFiles/204956/1000005499_jpg-3487626.JPG IG post for SOCOM and SOCSOUTH today. Holosun |
|
Originally Posted By Noah95: Holosun Originally Posted By Noah95: Originally Posted By Pleaforwar: https://www.ar15.com/media/mediaFiles/204956/1000005499_jpg-3487626.JPG IG post for SOCOM and SOCSOUTH today. Holosun Looks like it. Interesting |
|
Originally Posted By StealthGuy: Dawson never has their adjustable sights with tritium in stock. Anyone know the correct sights for a CAG G35? Is it the fiber optic front and black rear or fiber front and back?https://www.ar15.com/media/mediaFiles/366755/IMG_7284_jpeg-3483631.JPG Doctor Optic with Glock suppressor sights. |
|
ODA in Oki Attached File Attached File Attached File Attached File AFSOC in Oki Attached File |
IG @bayou_bengal-rifles