G19 in the SF communities. (Page 38 of 45)
|
Originally Posted By WittyTiger: First time I’ve seen a uid on a 239! Thats cool thanks for digging those up. Originally Posted By WittyTiger: Originally Posted By S-1: https://i.namu.wiki/i/u1eK9dfypbacB2xzuGiMvSwKFdKQbwJSVflPNgBNjIgGO6DftCMfq-AUz3iyRUCpB7h8hbp9JKnVel7fDx79kQ.webp https://i0.wp.com/s8pmc.lt/wp-content/uploads/2014/10/20-6cB98aL.jpg https://i0.wp.com/s8pmc.lt/wp-content/uploads/2014/10/11-PRuCjob.jpg https://i.pinimg.com/474x/13/48/b2/1348b2915b5721182dc70fb8f786def0.jpg First time I’ve seen a uid on a 239! Thats cool thanks for digging those up. Agreed. I have always kind of liked the 239 for some reason. |
Every normal man, at times, must be tempted to spit on his hands, hoist the black flag, and begin slitting throats.
Finished assembling my Mk27 Mod2 tribute this evening. I colored outside the lines a little... As in I had to settle for an Austrian-made Gen4 MOS since I probably had a better chance of striking oil in my backyard than finding a US-made variant. The optic is the commercial version HRS on an FCD plate, and I installed a smooth-faced Gen3 trigger / trigger bar assembly:  To magwell, or not to magwell - that is the question:  |
|
Originally Posted By havoc: Finished assembling my Mk27 Mod2 tribute this evening. I colored outside the lines a little... As in I had to settle for an Austrian-made Gen4 MOS since I probably had a better chance of striking oil in my backyard than finding a US-made variant. The optic is the commercial version HRS on an FCD plate, and I installed a smooth-faced Gen3 trigger / trigger bar assembly: https://www.ar15.com/media/mediaFiles/1054/IMG_4429-3384154.jpg https://www.ar15.com/media/mediaFiles/1054/IMG_4430-3384155.jpg To magwell, or not to magwell - that is the question: https://www.ar15.com/media/mediaFiles/1054/IMG_4426-3384156.jpg Basically the same, couldn’t find a USA made one so settled on Austrian for now. I have a TTI Magwell on order I’ll let you know if I like it |
At least you guys have Gen 4s... I was thinking about sending off the slide on my Gen 3 to have it milled for an RM06 I have on the way. Also adding the Trijicon suppressor height night sights. Not trying to pass it off as an authentic (and uber rare) Gen 3 MOS, but just wanted to clone the look. Would've gone Gen 4 route, but not willing to pay the prices they command. Was going to use Battle Werx to mill the slide. Is there a better route? 
|
|
Originally Posted By AZ_SBR: At least you guys have Gen 4s... I was thinking about sending off the slide on my Gen 3 to have it milled for an RM06 I have on the way. Will then add the Trijicon suppressor height night sights. Not trying to pass it off as an authentic (and uber rare) Gen 3 MOS, but just wanted to clone the look. Would've gone Gen 4 route, but not willing to pay the prices they command. Be honest, dumb or go for it? After pricing rmr cuts I decided to get a aftermarket slide with the cut. Went with AIM Surplus, it has the cut already and has front slide serrations. It was on sale when I ordered it last week, cost including shipping is a little more than half of a reputable slide cut. It's not ocd cloner correct but I can run the MK27mod2 setup and beat the shit out of it without destroying a collector piece. Attached File |
Taxation without representation
|
Originally Posted By AZ_SBR: At least you guys have Gen 4s... I was thinking about sending off the slide on my Gen 3 to have it milled for an RM06 I have on the way. Also adding the Trijicon suppressor height night sights. Not trying to pass it off as an authentic (and uber rare) Gen 3 MOS, but just wanted to clone the look. Would've gone Gen 4 route, but not willing to pay the prices they command. Was going to use Battle Werx to mill the slide. Is there a better route? https://live.staticflickr.com/65535/54153963005_5d6d0db41a_c.jpg https://live.staticflickr.com/65535/54152715032_a1259f7ee3_c.jpg  Attached File |
IG @bayou_bengal-rifles
|
Originally Posted By ChemTrailZ: What’s the depth of your it, and how is the cowitness with the trijicon suppressor sights? Originally Posted By ChemTrailZ: Originally Posted By mech4matsnova: Shot mine yesterday, it's a laser and I see why SF likes it. AIM slide was great, no issues. What’s the depth of your it, and how is the cowitness with the trijicon suppressor sights? It's a direct mount(no plates), sights are 1/4 co-witness, sights are Ameriglow "optic height". Can take a actual measurement later. |
Taxation without representation
|
Originally Posted By mech4matsnova: It's a direct mount(no plates), sights are 1/4 co-witness, sights are Ameriglow "optic height". Can take a actual measurement later. Awe, NM, wouldn’t fit what I’m looking for. Was gonna do a half ass mod 1 with direct milling but since I have an mos model now I can look for someone that’ll do a custom depth to match the mos |
|
Not sure if this has been posted before? Attached File Looks to be a gen 4 Glock 22 MOS based on the mags, but could be a 17 |
|
Originally Posted By LsuJon: Appreciate it CD! https://www.ar15.com/media/mediaFiles/316069/IMG_1580_jpeg-3387188.JPG 👍 |
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09,15,16,22,23,24'
Afghanistan: 09,10,11',14',17',18',19',20'&21'
Iraq: 91,03,04,05,06,08,09,15,16,22,23,24'
Afghanistan: 09,10,11',14',17',18',19',20'&21'
|
Originally Posted By homeyclaus: I would be interested in seeing how professionals carry pistols with a suppressor mounted - if they do that. Back during GW1, rigger shed made us a nylon type belt slide for our KAC suppressed M9. Justed asked my son (2nd gen SF) when he was in the CIF stated that they had dedicated holsters |
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09,15,16,22,23,24'
Afghanistan: 09,10,11',14',17',18',19',20'&21'
Iraq: 91,03,04,05,06,08,09,15,16,22,23,24'
Afghanistan: 09,10,11',14',17',18',19',20'&21'
|
Originally Posted By Combat_Diver: Back during GW1, rigger shed made us a nylon type belt slide for our KAC suppressed M9. Justed asked my son (2nd gen SF) when he was in the CIF stated that they had dedicated holsters I wonder if those holsters are something like what the Dutch KCT uses or if it's something like the Surefire Masterfire, I remember reading something about it being tested on a HALO jump or something. 
|
|
Originally Posted By GrizzlyAtlas: I wonder if those holsters are something like what the Dutch KCT uses or if it's something like the Surefire Masterfire, I remember reading something about it being tested on a HALO jump or something. https://64.media.tumblr.com/484d2b0797204541834f5d20fa0fdd97/e62866180423e324-49/s1280x1920/de7687b7e28ea0265fe27177f5f13284aba97203.jpg That looks like a kydex-covered race holster, especially if it has a pin to catch the muzzle of the can or pistol barrel. Obviously the race holsters don't cover as much of the gun, nor are the release/locking mechanisms as crud-resistant. |
In case you're wondering about the avatar pic:
https://www.youtube.com/watch?v=Z4ARGjbA14g
https://www.youtube.com/watch?v=Z4ARGjbA14g
|
Originally Posted By GrizzlyAtlas: I wonder if those holsters are something like what the Dutch KCT uses or if it's something like the Surefire Masterfire, I remember reading something about it being tested on a HALO jump or something. https://64.media.tumblr.com/484d2b0797204541834f5d20fa0fdd97/e62866180423e324-49/s1280x1920/de7687b7e28ea0265fe27177f5f13284aba97203.jpg Looks a lot like the Ragnarok SD t.rex makes. |
|
Which suppressor? |
|
Originally Posted By homeyclaus: I would be interested in seeing how professionals carry pistols with a suppressor mounted - if they do that. Crye gun clip for the win. Super simple. Protects what it needs to and much more solid than it appears for how simple it is.  My three USA mos Glocks with LH threaded factory Glock barrels.  |
|
Originally Posted By LsuJon: Appreciate it CD! https://www.ar15.com/media/mediaFiles/316069/IMG_1580_jpeg-3387188.JPG Who makes those little kydex belt slide style holsters? I like it. |
|
Originally Posted By M4AZ: Crye gun clip for the win. Super simple. Protects what it needs to and much more solid than it appears for how simple it is. https://i.postimg.cc/50xFsY74/IMG-9951.jpg My three USA mos Glocks with LH threaded factory Glock barrels. https://i.postimg.cc/j5Znmxmz/IMG-9953.jpg Is there a place to order those with cheaper shipping than Crye proper? (NVM, ordered anyways) |
In case you're wondering about the avatar pic:
https://www.youtube.com/watch?v=Z4ARGjbA14g
https://www.youtube.com/watch?v=Z4ARGjbA14g
|
Originally Posted By spydercomonkey: Who makes those little kydex belt slide style holsters? I like it. Originally Posted By spydercomonkey: Originally Posted By LsuJon: Appreciate it CD! https://www.ar15.com/media/mediaFiles/316069/IMG_1580_jpeg-3387188.JPG Who makes those little kydex belt slide style holsters? I like it. |
In memory of my son Sean James, born 6/25/97. Died 9/16/13.
We will be reunited in heaven.
We will be reunited in heaven.
|
Originally Posted By M4AZ: Crye gun clip for the win. Super simple. Protects what it needs to and much more solid than it appears for how simple it is. https://i.postimg.cc/50xFsY74/IMG-9951.jpg My three USA mos Glocks with LH threaded factory Glock barrels. https://i.postimg.cc/j5Znmxmz/IMG-9953.jpg I still kick myself for not buying the one I passed on before I knew what it was; Thought $800 was too much for it and now I can’t even find a non threaded USA model 
|
What have the Romans ever done for us?
Joined:
Jul 2008
Posts:
42623
EE: 100% (212)
TN, USA
|
Originally Posted By gotuonpaper: Agreed. I have always kind of liked the 239 for some reason. Buddy has a suppressed 239 with extended mags. Awesome little shooter. |
Panem et Circenses
I have also learned from experience that the greater part of our happiness or misery depends upon our dispositions, and not upon our circumstances.
I have also learned from experience that the greater part of our happiness or misery depends upon our dispositions, and not upon our circumstances.
|
Since I’m now questing for my USA made mk27, decided I’d like to nab a gen 4 mk26 mod 1 as well Most info I could find was here Attached File And I couldn’t find an actual sku number so can’t determine if it’s a USA made model like the MK27 gen 4’s, and finding a pic of one in service has been difficult. Any know if these are USA or Austrian made? Much appreciated |
|
Originally Posted By ChemTrailZ: Since I’m now questing for my USA made mk27, decided I’d like to nab a gen 4 mk26 mod 1 as well Most info I could find was here https://www.ar15.com/media/mediaFiles/388771/IMG_1321_png-3398182.JPG And I couldn’t find an actual sku number so can’t determine if it’s a USA made model like the MK27 gen 4’s, and finding a pic of one in service has been difficult. Any know if these are USA or Austrian made? Much appreciated So in case anyone else is interested, the MK26 Mod 1 is a gen 4 USA model. |
|
Originally Posted By ChemTrailZ: Since I’m now questing for my USA made mk27, decided I’d like to nab a gen 4 mk26 mod 1 as well Most info I could find was here https://www.ar15.com/media/mediaFiles/388771/IMG_1321_png-3398182.JPG And I couldn’t find an actual sku number so can’t determine if it’s a USA made model like the MK27 gen 4’s, and finding a pic of one in service has been difficult. Any know if these are USA or Austrian made? Much appreciated There appears to be a PN sku, which I always thought meant Austrian marked. Was this screenshot the NSN for the MK26 or Mod 1? |
|
Originally Posted By Parabellum226: There appears to be a PN sku, which I always thought meant Austrian marked. Was this screenshot the NSN for the MK26 or Mod 1? This is a Glock 26 mod 1 as indicated by Gen 4. The sku usually starts with a P(Austria) or U(us) and I didn’t see it listed, so assumed it wasn’t there, but there was a part number, so I reached out to some Glock autists to see if they could help, and confirmed it’s an odd code because it’s missing some of normal sku nomenclature. But the part number actually breaks down into: 26=model 26 5=5.5 lb trigger 0= standard model 7= Glock night sights 1= extended slide stop 6= special order Glock USA (7 would have indicated Glock Austria) |
|
Originally Posted By havoc: Finished assembling my Mk27 Mod2 tribute this evening. I colored outside the lines a little... As in I had to settle for an Austrian-made Gen4 MOS since I probably had a better chance of striking oil in my backyard than finding a US-made variant. The optic is the commercial version HRS on an FCD plate, and I installed a smooth-faced Gen3 trigger / trigger bar assembly: https://www.ar15.com/media/mediaFiles/1054/IMG_4429-3384154.jpg https://www.ar15.com/media/mediaFiles/1054/IMG_4430-3384155.jpg To magwell, or not to magwell - that is the question: https://www.ar15.com/media/mediaFiles/1054/IMG_4426-3384156.jpg Magwell |
|
@Combat_Diver Attached File |
Taxation without representation
|
Originally Posted By mech4matsnova: @Combat_Diver https://www.ar15.com/media/mediaFiles/349748/1000011090_jpg-3404604.JPG Via Pineland! Belt slide looking good. ETA: Been almost 20 yrs since instructor for Robin Sage and 40 yrs since going thru as a student. Getting old 
|
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09,15,16,22,23,24'
Afghanistan: 09,10,11',14',17',18',19',20'&21'
Iraq: 91,03,04,05,06,08,09,15,16,22,23,24'
Afghanistan: 09,10,11',14',17',18',19',20'&21'
|
Attached File Attached File Since this has kind of turned into a clone thread, here are some pictures of a couple of clones of weapons I used. Regards |
|
Several old Mk27 Mod 0s here Attached File |
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09,15,16,22,23,24'
Afghanistan: 09,10,11',14',17',18',19',20'&21'
Iraq: 91,03,04,05,06,08,09,15,16,22,23,24'
Afghanistan: 09,10,11',14',17',18',19',20'&21'
|
Originally Posted By Combat_Diver: Several old Mk27 Mod 0s here https://www.ar15.com/media/mediaFiles/32677/IMG_5305_jpeg-3412906.JPG What's the story on the M9s? |
Taxation without representation
|
Originally Posted By mech4matsnova: What's the story on the M9s? All those pistols are TPE (Theater Property Equipment) for a SOF element. |
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09,15,16,22,23,24'
Afghanistan: 09,10,11',14',17',18',19',20'&21'
Iraq: 91,03,04,05,06,08,09,15,16,22,23,24'
Afghanistan: 09,10,11',14',17',18',19',20'&21'
|
Originally Posted By Combat_Diver: All those pistols are TPE (Theater Property Equipment) for a SOF element. Originally Posted By Combat_Diver: Originally Posted By mech4matsnova: What's the story on the M9s? All those pistols are TPE (Theater Property Equipment) for a SOF element. If you can answer: Does the individual team guy get to pick which pistol he wants to use? How does the teams like the G19 in general? The M9? Do they have any M9A1s(or other railed/modern variants like A4s)?[I'm also a Beretta guy  ]Are they used for the same mission/purpose(compact vs duty pistol)? Thanks for sharing(if able to do so). |
Taxation without representation
|
Originally Posted By mech4matsnova: If you can answer: Does the individual team guy get to pick which pistol he wants to use? How does the teams like the G19 in general? The M9? Do they have any M9A1s(or other railed/modern variants like A4s)?[I'm also a Beretta guy ]Are they used for the same mission/purpose(compact vs duty pistol)? Thanks for sharing(if able to do so). TPE guns are for when agumentees come in or equipment is enroute/sent home. Individual preference, most like the Glock and those are standard M9s. Marines are the only ones with the M9A1s that I know of. My preference is still the M1911/M1911A1 as that was my original issued sidearm in 5th SFGA back in 1984. My chosen 1911 in 2014 in Astan. Attached File As far as mission/purpose. The M1911A1, M9 and M17 are full size service handguns. The M11 and Mk27 (G19) fill the compact requirement. M18 does not meet the compact requirement as frame is still full size. Mk26 (G26) meets the subcompact requirement. |
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09,15,16,22,23,24'
Afghanistan: 09,10,11',14',17',18',19',20'&21'
Iraq: 91,03,04,05,06,08,09,15,16,22,23,24'
Afghanistan: 09,10,11',14',17',18',19',20'&21'
|
Originally Posted By CavScout: @WittyTiger how quiet is that can? I have an Octane 9 and an Omega 9k and they are not very quiet but the Omega 9k seems better than the Octane at the ear. Originally Posted By CavScout: @WittyTiger how quiet is that can? I have an Octane 9 and an Omega 9k and they are not very quiet but the Omega 9k seems better than the Octane at the ear. Pretty damn quite actually. Shot it with 124 supers yesterday and it wasn’t hearing safe but damn near. Trying out subs soon and am very excited. @CavScout |
|
Originally Posted By Combat_Diver: M18 does not meet the compact requirement as frame is still full size. At the risk of veering off target, I thought it was a bit odd that the Army specified a modular pistol design, but then opted for two pistol models - M17 and M18 - that only differ by 0.8" in barrel length. I can understand the desire for magazine compatibility, but it departs from the concept of the M9 and M11 that they were supposedly replacing, with the M11 serving as a more concealable pistol for CID and other roles. When I bought my military production M18 last year, I switched the grip module out for the 15-round XCompact grip, which I think makes more sense when paired with the full size M17. Attached File Attached File |
Joined:
Nov 2022
Posts:
629
EE: 100% (7)
MI, USA
|
Originally Posted By LsuJon: Just keep it as a mk27 mod 0 https://www.ar15.com/media/mediaFiles/316069/IMG_9631_jpeg-3384543.JPG they just dump guns out on a tile floor? 
|
|
Originally Posted By 3ACR_Scout: At the risk of veering off target, I thought it was a bit odd that the Army specified a modular pistol design, but then opted for two pistol models - M17 and M18 - that only differ by 0.8" in barrel length. I can understand the desire for magazine compatibility, but it departs from the concept of the M9 and M11 that they were supposedly replacing, with the M11 serving as a more concealable pistol for CID and other roles. When I bought my military production M18 last year, I switched the grip module out for the 15-round XCompact grip, which I think makes more sense when paired with the full size M17. https://www.ar15.com/media/mediaFiles/27888/M18_06_jpg-2947381.JPG https://www.ar15.com/media/mediaFiles/27888/M17_M18_XSeries_Grips_jpg-3016725.JPG Attached File The Army changed its definition of "modular" when the saw what the SIG contract bid would be. A Glock 19 capable of changing the rear grip sizes to better fit hands, the accessory rail on dust cover and ability fit night sights all met the specifications written up to justify the M17 M18 MHS. And how did SIG get a variance from BATFE to classify the FCU as the main component of the P320 system? Glock could have done the same thing with the TMH housing to allow Armorers to change out the commonly referred to as the "receiver" lower frame as damage rendered them inop without having to totally code out a handgun. |
1995 M1025A2 5SFG GMV 2A11C
1995 M1025A2 1SFG GMV 5
1984 Chenowth M1040 Fast Attack Vehicle 0014 "Horney Toad"
1995 M1025A2 1SFG GMV 5
1984 Chenowth M1040 Fast Attack Vehicle 0014 "Horney Toad"
G19 in the SF communities. (Page 38 of 45)
Join the Community
Your next conversation starts here.
Create your free account to join discussions, share your experience, save topics, and connect with the AR15.COM community.
- Join discussions
- Follow topics and replies
- Connect with fellow enthusiasts
Already a member? Sign in
Stay informed by subscribing to our Newsletter