Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
5/2/2006 10:15:12 AM EDT
I hate my POS Linksys wireless router. The signal strength and speed constantly varies.

So what are some good alternatives?

Thanks in advance!

Bomber

Edited to make the title more understandable to the impaired
5/2/2006 10:19:27 AM EDT
[#1]
Porter Cable or Dewalt - oh, wrong kind of router
5/2/2006 10:20:06 AM EDT
[#2]
Linksys is pretty much my go-to brand.
5/2/2006 10:20:51 AM EDT
[#3]

Quoted:
Porter Cable or Dewalt - oh, wrong kind of router



No kidding--what a disappointment.  

Routers are my overall favorite toys.  
5/2/2006 10:22:38 AM EDT
[#4]
I much prefer D-Link routers.  I've run a couple w/ no problems and you can usually get them with a mail-in rebate that makes them dirt cheap.
5/2/2006 10:23:25 AM EDT
[#5]
Well I already have several routers (Ryobi RE600 mounted in a table and a Dewalt for free hand stuff).

Now back to the topic at hand. Any non Linksys POS suggestions?

Bomber
5/2/2006 10:28:37 AM EDT
[#6]
Tag

Looking for a new one as well.

20
5/2/2006 10:30:18 AM EDT
[#7]
Try using a different channel on your router.
5/2/2006 10:32:58 AM EDT
[#8]

Quoted:
Try using a different channel on your router.



I learned from a similar post that wireless telephone will/can screw with the signal.  Ya may need a 1970's telephone system for your 21st century WiFi to work reliably.
5/2/2006 10:38:00 AM EDT
[#9]
Belkin or SMC.

D-Link we had in the office had awesome range and security but would randomly block out some incoming and outgoing traffic (may be fixed by now).  Took forever to figure out what the problem was with the network.

Linksys (you already know)





5/2/2006 10:40:12 AM EDT
[#10]
You will do nothing better in life than to hack your linksys router. It'll up the power and make it very dependable.

PM me and I'll link you to the software you need to do this. Very easy.


OR you can go with a netgear router.
5/2/2006 10:43:49 AM EDT
[#11]
D-Link DI-624 wireless router is one of the best bargains of the wireless world.  The antenna on board gives excellent range and set up is simple.  We use them here on our enterprise network for spot duty and special projects.
5/2/2006 10:45:09 AM EDT
[#12]
I was getting very inconsistent, spotty performance from my linksys, and I went through two of them before I gave up and bought at Belkin.  Not a single hiccup since.  
5/2/2006 10:46:32 AM EDT
[#13]
IBTP

Belkin
D-Link
SMC
Netgear
5/2/2006 10:48:10 AM EDT
[#14]

Quoted:

Quoted:
Porter Cable or Dewalt - oh, wrong kind of router



No kidding--what a disappointment.  

Routers are my overall favorite toys.  



About six months ago, my Mom decided she wanted a wireless setup in the house, so I went and bought a wireless router, and pc cards. My Dad called while I was setting it all up and asked what I was doing........ I told him I was setting up the new router I had just bought... he said and I quote " I already have 2 of those in the garage, why the hell did you buy another one?" Took me about a minute to stop laughing and explain that this wasnt that kind of router.
5/2/2006 10:50:47 AM EDT
[#15]
Wireless...

Stay off of channels 1,6 & 11 Digging for more better info on this now.

The main channels to use are 1,6 & 11 due to these three are the only non-overlaping channels. 6 is the default out of the box for most systems.

Use Netstumbler to view all of the access points that you are in the area of.

Those areThis is the same frequency band that is used by 2.4GHZ wireless telephones, they are a possible source of your problems also.

Ted...
5/2/2006 10:51:09 AM EDT
[#16]
Cisco Aironet AP and maybe a little PIX 501. Works for me.
5/2/2006 10:52:45 AM EDT
[#17]
I have had 4 different linksys routers and never a problem
First was a 11B
then a 54G
Then another 54G that didnt work right with the linksys range expander
Then back to a regular 54G with powerboost
and we are using it over a range of probably 800 feet (400-500) either way between 3 houses
O and it has a set of High Gain antennas on it

We have a neighborhood gaming LAN set up with it.
5/2/2006 10:53:01 AM EDT
[#18]

Quoted:
Cisco Aironet AP and maybe a little PIX 501. Works for me.



Nice, but a little overkill for most.
5/2/2006 10:54:48 AM EDT
[#19]


Sorry, I couldn't resist.
5/2/2006 11:04:01 AM EDT
[#20]
I have one of those Netgear MIMO routers with the flashing blue lights on top, and a Netgear wireless card.  I am about 100' from the wireless router, getting very good signal, and 108mbps.  I recommend them.
5/2/2006 11:13:45 AM EDT
[#21]
I have an Actiontec box that I got at Comp USA.

Its 4 in 1 router, firewall, wireless gateway and DSL modem.

I set it up and forgot about it. NO problems in over 8 months.

I have been recommending and installing their products ever since with no complaints from my customers.
5/2/2006 11:58:32 AM EDT
[#22]

Quoted:
I have had 4 different linksys routers and never a problem
First was a 11B
then a 54G
Then another 54G that didnt work right with the linksys range expander
Then back to a regular 54G with powerboost
and we are using it over a range of probably 800 feet (400-500) either way between 3 houses
O and it has a set of High Gain antennas on it

We have a neighborhood gaming LAN set up with it.



This is the only sort of application I'd recommend a 54mb router for, when you need the speed between your wireless computer and another device on the local network.  11mb is just fine for wireless internet access, as the average cable or DSL line runs faaaaar slower than even 11mb.  The extra speed won't getcha anywhere faster.
5/2/2006 12:10:23 PM EDT
[#23]

5/3/2006 1:50:08 PM EDT
[#24]

Quoted:
You will do nothing better in life than to hack your linksys router. It'll up the power and make it very dependable.

PM me and I'll link you to the software you need to do this. Very easy.


OR you can go with a netgear router.



I've had really good luck with Linksys routers and have had no problems with friends who bought them on my recommendation.

OTOH, my buddy's wife decided to ignore my advice and bought a Netgear router ("it looked prettier") and Netgear WiFi cards.  With the router 12 feet away across the room with clear line-of-sight they get "Low Signal" warnings and drop outs.  Move the laptop to the next room and they lose signal entirely.  Of course, somehow this is all my fault.

You may want to try and extend the range of your Linksys if you're having problems penetrating through walls.   I've found this template works well and is free - just peel a few layers of tin foil off your hat and use it on this antenna.  

ETA - I've got an old v1.0 WRT54G which is very hackable, but I haven't gotten around to it yet.  What firmware have you had good results with?
5/3/2006 1:52:01 PM EDT
[#25]

Quoted:
Cisco Aironet AP and maybe a little PIX 501. Works for me.



Me too!! I have the PIX 506e though..
5/3/2006 1:52:24 PM EDT
[#26]
I've got a lightly used Netgear I'd let go for cheap. Works great. PM me!
5/3/2006 1:54:53 PM EDT
[#27]
Had a Netgear, it wasn't that good.

Got a LinkSys. It works OK. But the signal strength does vary a lot. I have more problems with my POS cable provider than my router.
5/3/2006 2:11:24 PM EDT
[#28]
I would reccomend a D-Link. Also, get something that can do 802.11a, I have theirs and its working great, a lot less chance of interference. If i remember, its a DI-784. you'll need a card that can do A to get full advantage of that. A has a bit shorter range but is much less susceptible to interference from Microwaves, cordless phones, etc...

Edit: yup..thats the one, Much cheaper nowadays....BLEH

www.compusa.com/products/product_info.asp?product_code=50484126&pfp=SEARCH
5/3/2006 2:19:56 PM EDT
[#29]

Quoted:

Quoted:
Cisco Aironet AP and maybe a little PIX 501. Works for me.



Me too!! I have the PIX 506e though..



Are you doing a VPN to the PIX back into your wired network?
5/3/2006 2:26:52 PM EDT
[#30]
i have a general distaste for "all-in-one" solutions, i would rather have a good router and a good wireless access point. i personally use a linksys rv082 router and a linksys wap54g access point. the linksys wrt54g is the wap54g's cousin, being both a router and access point. these two pieces of hardware are nice because there is 3rd party firmware availible that allows you to hack the device and add new features, increase transmission range, etc.
5/3/2006 2:34:38 PM EDT
[#31]
Have you tried loading DD-WRT or sveasoft on your wireless router?

They have firmware that's a helluva lot better than what comes from the manufacturer and fixes a lot of problems.

Has lots of features and DD-WRT is free!

goto www.sveasoft.com or get the freebee version from

http://digg.com/linux_unix/Released:_DD-WRT_v23_Final_for_Linksys_WRT54G_(and_others)