Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 10/26/2004 6:54:34 PM EST
Thinking about getting some. Anybody have em' and what do you think of them?
Link Posted: 10/26/2004 6:58:01 PM EST
Tried them on a friends rifle. I don't like them. They rely on friction to make the adjustment. There is no discernable clicks to make sure your stopping point is the same each time.

Might be a good thing for the occasional "dial diddler". But I wouldn't recommend them.
Link Posted: 10/27/2004 3:13:26 AM EST
Right. Nothing like "real" target knobs on a scope manufactured with them. I guess they are better than nothing if you don't want to buy a new scope.
Link Posted: 10/27/2004 3:17:17 AM EST
[Last Edit: 10/27/2004 3:18:58 AM EST by 444slayer]
They are too expensive, too, at nearly $25 each. I have one set. It will be my last. I put them on a VariX-II which doesn't have clicks anyway. I thought if you put them on a scope with click adjustments, they would still have clicks. No?
Link Posted: 10/27/2004 3:17:40 AM EST
They rely on friction to make the adjustment. There is no discernable clicks to make sure your stopping point is the same each time.


Not true. They still have the same clicks as before installation. They work in the same manner as factory installed turrets.

The knob on the turret engages with the screwdriver slot on the scope's windage and elevation adjustments. If installed by simply following directions they work well.
Link Posted: 10/27/2004 3:24:45 AM EST
[Last Edit: 10/27/2004 3:26:09 AM EST by jmoffatt]

Originally Posted By A_Free_Man:
They rely on friction to make the adjustment. There is no discernable clicks to make sure your stopping point is the same each time.


Not true. They still have the same clicks as before installation. They work in the same manner as factory installed turrets.

The knob on the turret engages with the screwdriver slot on the scope's windage and elevation adjustments. If installed by simply following directions they work well.




They are only as good as the scope you put them on, if it has discernible audible clicks then that will be transfered through the knobs, if the scope is cheap or does not have good discernible clicks then obviously adding the knobs will not make the clicks discernible. ( did that make any sense? )
Link Posted: 10/27/2004 3:27:01 AM EST
This thread is in no relation to my name....
<-------



I am Stoney Point, and I approve this message...
Link Posted: 10/27/2004 5:41:11 AM EST
I've got them on a Leupold. They "click" just fine for me, and I like them very much.
Link Posted: 10/27/2004 5:43:58 AM EST
WHAT!!! you mean that if I put these on a tasco scope It wont preform like a Leupold? Say it isnt so!
Top Top