User Panel
Posted: 8/2/2021 4:49:56 PM EDT
So, I picked one of these up the other day. Initially, I was holding out for a Howa mini, but this came along first so I didn't feel like waiting God-knows how long, so I picked it up. I haven't even had it to the range yet, and I'm more and more impressed with this little rifle! Since I don't have any Mini-30 mags, I'll probably order the AR magwell from Ruger for $20 and use 7.62x39 AR mags. They're certainly cheaper than mini 30 mags.
I'm also trying to decide on a scope. I'm thinking something like a PA 1-6 ACSS would be about perfect for this?PA 1-6 ACSS I'm also contemplating the Nodak sight set, but since these 7.62x39 RAR are inexplicably accurate, I thought a scope would be better. Then I fell into a YouTube wormhole and found this... HOW FAST can you run your BOLT ACTION? Glades Armory swept back bolt handle Ruger American That bolt handle looks pretty damn slick! So who else has one of these slick little rifles, and what have you done to it? |
|
I have one in 5.56, pretty handy little rifle. Mine has a PA red dot and works great within 100 yards for my purposes.
|
|
I put a cheap Vortex 4-12 on mine. Great little gun. Very accurate, even with cheap trash ammo.
Attached File |
|
I'm running the PA GLx 2x ACSS on mine.
Been using it while exploring on the Rokon. Fun set up |
|
I added a Leupy Ultralight 3-9x. It's discontinued though, something in the 1.5-5x or thereabouts would be perfect. I have the custom CDS turrets for Vmax 123gr load and from 0 to 300 yds the range is mine.
|
|
What’s the bore? .308? .310?
I used a 1-4x and was plenty out to 500 yards. 7.62x39 is a pig in the air. |
|
|
|
|
I put a 3-9x that I wasn't using for anything else on mine when I first got it just to try it out. After deciding how I wanted to set it up, I went with a Leupold VX-R Patrol 1.25-4x. I'm happy with it. I also painted the stock with a sand-colored rough textured paint that makes it very grippy. Then I added the neoprene sleeve on the stock for comfort against the cheek. Otherwise it would be like sandpaper on your face.
Attached File ETA: That picture has weird lighting and doesn't show the new color of the rough paint correctly. These close ups are better. Attached File Attached File |
|
Opposite for me. I was holding out for one of those but found a Howa Mini at the St Louis Cabela’s for 450 back in Feb. it came with a cheapy Nikko Stirling scope.
I’ll keep it until I can afford something better. Cool gun the Mini, I’d like to upgrade the plate and well to metal but that will have to wait as well. |
|
|
|
Quoted: I Form 1’d mine to 11.5 inches. https://www.ar15.com/media/mediaFiles/131934/2307219D-B1ED-4B9E-8E4F-4D2C0E975BEC-2037424.jpg View Quote You magnificent bastard. Attached File |
|
I put a Vortex Crossfire II 4-16x50 on mine (300blkout version).
I know it's overkill but my daughter (6) wants to use it this year to shoot her first deer. Attached File I love this damn gun. |
|
SWFA Super Sniper Ultralight 2.5-10X32
The only thing I don’t like is the BDC reticle, but they did not offer the plex when I purchased them. I got the 7.62 last fall and just found a 5.56 last week. So far loving both these little rifles. Attached File |
|
When I got mine, the whole point was low cost platform for shooting cheap ammo (for the children, dontchaknow).
After shooting it once with an old Leopold 3x9; Mine! Put a 1x5 Crimson Trace 3000 series on it I found on sale, and with some left over Nightforce rings... love it. 8" plates at 400 if I do my part. Cheap too! |
|
Quoted: SWFA Super Sniper Ultralight 2.5-10X32 The only thing I don’t like is the BDC reticle, but they did not offer the plex when I purchased them. I got the 7.62 last fall and just found a 5.56 last week. So far loving both these little rifles. https://www.ar15.com/media/mediaFiles/18550/E372BD9D-D36E-4DAE-ABBF-F1F77102CD99_jpe-2037837.JPG View Quote Best light weight scope around for the money. |
|
Looking at Burris RT6, PA ACSS 1-6, Bushnell AR optics 1-8, and the Riton X3 1-8.
|
|
Picked one up new this past fall for just over $400. I webt to Academy the next day to get some cheap rings to mount a generic 3-9x40 I had laying around and ended up buying a Nikon P-300 2-7x32 with the bdc reticle for 300 blk. for $80. It works great with 7.62x39. Said and done I have a Ca. AK for under $500.
It makes me happy. |
|
Quoted: Yeah, I've literally been sending out weekly messages/emails to at LEAST 20 different vendors asking "...do you have any...". Finally got a hit View Quote View All Quotes View All Quotes Quoted: Quoted: I've had one on order since December. Yeah, I've literally been sending out weekly messages/emails to at LEAST 20 different vendors asking "...do you have any...". Finally got a hit Attached File |
|
Attached File
I have one in 556 and 308 with magazine conversion. Both have low mounted Leupold 3-9x40 scopes. Both are great shooters, two of my favorite guns. |
|
Alright, in the sub-$400 bracket I'm looking at....
Blackhound 1-8 (don't know much about 'em, but they're supposedly a Chinese OEM for others) PA 1-6 ACSS Burris RT-6 Riton X3 Tactix (on sale at Ranier) Bushnell AR 1-8 Strike Eagle 1-8 (might try "make on offer" at scopelist) Recommendations? |
|
One thing to consider with the Ruger American's is to change out the cheesy MIM cocking piece for a proper billet cocking piece. First things I did to my .308 Hunter was to change out the cocking piece, bolt handle and knob, and the plastic bolt shroud. The firing pin removal tool makes the job simple to do.
https://www.anarchyoutdoors.com/ad-arms-billet-ruger-precision-american-rifle-cocking-piece/ Attached File |
|
Quoted: Alright, in the sub-$400 bracket I'm looking at.... Blackhound 1-8 (don't know much about 'em, but they're supposedly a Chinese OEM for others) PA 1-6 ACSS Burris RT-6 Riton X3 Tactix (on sale at Ranier) Bushnell AR 1-8 Strike Eagle 1-8 (might try "make on offer" at scopelist) Recommendations? View Quote I can't speak to the Riton or the Blackhound, but the Burris RT-6 is easily the best above the rest of those. It punches WAY above it's weight and is the best sub $500 LPVO, imo. I don't like the Strike Eagle unless it's a crazy cheap. |
|
Quoted: SWFA Super Sniper Ultralight 2.5-10X32 The only thing I don’t like is the BDC reticle, but they did not offer the plex when I purchased them. I got the 7.62 last fall and just found a 5.56 last week. So far loving both these little rifles. https://www.ar15.com/media/mediaFiles/18550/E372BD9D-D36E-4DAE-ABBF-F1F77102CD99_jpe-2037837.JPG View Quote Tell me 'bout that stock pack |
|
Vortex crossfire 1-4. It can be crosshairs or a red dot. Was hitting bullseyes at 100 with it Sunday.
|
|
If Ruger ever introduces a left handed RAR in 7.62x39 I will be all over that like white on rice.
I was thinking that Primary Arms scope would be a perfect fit for it. |
|
I have a Gen 1 (flush mag) in .223....I could not abide the solid FDE stock so I painted it...The sling is just a tan repro M1 Carbine sling.
I put a straight 4 X 32 Redfield in low rings on it. It seemed sorta pointless to over-scope a 16" barreled bolt action. It shoots a hair under 1 MOA (three rounds) at 100 yards with some 90s vintage Winchester Super X 55 gr SPs I happen to have a lot of....Meh, good enough. Attached File |
|
Just shot one we recovered at work today. Not sure how they would hold up over the long term (not a big fan of the plastic trigger guard) but as others have said these rifles shoot extremely well, even with the cheapest ammo.
|
|
Quoted: Tell me 'bout that stock pack View Quote Tactical Stock pack off Amazon Seems pretty solid for the few times I have used it. The 5.56 is wearing THIS ONE from Midway |
|
Quoted: Just shot one we recovered at work today. Not sure how they would hold up over the long term (not a big fan of the plastic trigger guard) but as others have said these rifles shoot extremely well, even with the cheapest ammo. View Quote Here's a article I saved about ordering a Boyd's stock for one. http://gatdaily.com/boyds-gunstocks-to-the-rescue/ I'm not sure if i would mess with it seeing how few rounds I'd put through it (ground hogs and such) but it's good to have options.....It's a five year-old article so maybe Boyds has made it easier by now. |
|
|
Quoted: Here's a article I saved about ordering a Boyd's stock for one. http://gatdaily.com/boyds-gunstocks-to-the-rescue/ I'm not sure if i would mess with it seeing how few rounds I'd put through it (ground hogs and such) but it's good to have options.....It's a five year-old article so maybe Boyds has made it easier by now. View Quote Those Boyd stocks are nice, it’s an upgrade I would do if I owned one. But even as is, for an economy model rifle, I’m impressed at how well the one I shot performed |
|
Quoted: Those Boyd stocks are nice, it’s an upgrade I would do if I owned one. But even as is, for an economy model rifle, I’m impressed at how well the one I shot performed View Quote View All Quotes View All Quotes Quoted: Quoted: Here's a article I saved about ordering a Boyd's stock for one. http://gatdaily.com/boyds-gunstocks-to-the-rescue/ I'm not sure if i would mess with it seeing how few rounds I'd put through it (ground hogs and such) but it's good to have options.....It's a five year-old article so maybe Boyds has made it easier by now. Those Boyd stocks are nice, it’s an upgrade I would do if I owned one. But even as is, for an economy model rifle, I’m impressed at how well the one I shot performed Yeah my example shot well. As for the stock it's certainly a more attractive option than that club-footed lookin' MagPul stock.....It's hideous. Looks like the Boyds would be a bit cheaper in price too. |
|
Quoted: I'm biased of course. https://www.ar15.com/media/mediaFiles/91277/NDS-58_a_JPG-2028704.jpg But if I were to scope it I'd go with a 1-4x variable. View Quote Mike holysh*t I need that rail!!!! @mike_nds |
|
Quoted: I'm biased of course. https://www.ar15.com/media/mediaFiles/91277/NDS-58_a_JPG-2028704.jpg But if I were to scope it I'd go with a 1-4x variable. View Quote Mine looks the same! Thanks for sending these up to canuckistan Anyone getting some light strikes with m193? The old norc ammo i had was bad New ae xm193 i had 1 out of 155 that wouldnt go, looked like a solid strike on the primer |
|
I’ve got a American Ranch in 300 BLK that got SBR’d. Barrel is going to be cut down to 9” next week. Sitting in an Indian Creek Designs chassis with a MDT folding rifle stock. I was still deciding on what glass for the rifle, so thanks for the thread. I think I may go with the Burris.
|
|
Quoted: I'm biased of course. https://www.ar15.com/media/mediaFiles/91277/NDS-58_a_JPG-2028704.jpg But if I were to scope it I'd go with a 1-4x variable. View Quote Those sights make perfect sense for a 7.62 X 39 carbine that's really not much more a 150 yard gun anyway. I can see where it would make for a quick handling package for the eastern deer woods where shots are taken well within that distance. |
|
Last year I had enough Cabelas gift cards to walk out with a used one for a little over $50 but instead bought 1k 5.56. Oh well. Still want one.
|
|
|
That's pretty sick.
I talked to a customer yesterday that's going to try our front sight with that rail. |
|
I went with the Burris RT-6. I picked it up from the gents at CameraLandNY/Sport Optics. Doug/Neil gave me a screaming deal!
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.