Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 6/11/2001 11:48:03 AM EST
I took my BM Dissipator flat top out today for the first time. It has a DPMS detachable sight on it to back up my Aimpoint. Only one problem, I had to bring the aperture all the way to the left to get my groupings correct. At that position they are barely zeroed! BM says that they will have to re-align the barrel. What does everyone think? Thanks in advance for any help.[>:/]
Link Posted: 6/11/2001 11:50:24 AM EST
Sounds like an overtorqued barrel. Let Bushmaster fix it under warranty.
Link Posted: 6/11/2001 7:28:24 PM EST
I had a similar problem with a Bushmaster. They will tweek the barrel indexing pin. No need to worry about being in warranty they do those kind of repairs/adjustments at no cost to you. You only have to send the upper. They will make it right.
Link Posted: 6/11/2001 8:23:07 PM EST
Another snake bite victum! [smoke] Is it just me or are there a lot of people reporting snake bites lately?
Link Posted: 6/11/2001 8:31:16 PM EST
Rob Dog, is your rifle a factory Bushmaster or did someone build it from a kit? The one I had repaired was built from a kit. There are alot of unskilled "gunsmiths" out there.
Link Posted: 6/12/2001 5:02:39 AM EST
This comes from torquing the barrel nut while holding the barrel. The nut actually tightens on the upper receiver and the index pin has to resist the torque. It was never meant to do this. Hold the upper receiver while torquing and this won't happen. Norm
Link Posted: 6/12/2001 6:25:00 PM EST
It is a factory gun. The people at BM are more than helpful, and I am sending it back. Thanks for the help.
Top Top