Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
Posted: 8/23/2004 7:48:06 PM EST
I am having a problem with the key lock cylinder actuator/bar arm not activating the ingition switch. I can start the pick up with a screw driver when I bypass the actuator/bar arm. I it is not pushing the bar arm far enough forward to activate the ignition switch. I also can not take the vehichle out of park when I unlock the steering collum are these problems conected to each other. I have the steering wheel removed and the actuator/bar arm appear to be two seperate peices how would I begin to remove them to replace the broken part and is this a common problem.
Thanks in advance
Colt
Link Posted: 8/23/2004 8:05:37 PM EST
[Last Edit: 8/23/2004 8:06:21 PM EST by colt_5_5_6]
any one with any idea? I cant find anything that covers this in my haynes manual
Link Posted: 8/23/2004 8:05:39 PM EST
go to www.autozone.com and look in their free online car/truck repair manuals
Link Posted: 8/24/2004 2:24:10 AM EST
I think my problem is a ignition actuator which sitts above the ignition lock assembly and is pushed forward by a gear. Any one ever take one out?
Top Top