Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 8/26/2001 3:22:57 PM EST
I have a small home network (6 computers) feeding off of a 2wire Homeportal residential gateway, they all share the cable modem line with no problems. I want to integrate an old IBM box into this to just run as a SETI@HOME machine (It is a 133mhz clunnker). There are no USB ports on the aptiva and I am not inclined on adding one, but it does have an ehternet card and two serial ports and a parallel port. Would I just stick another ethernet card into the server machine and connect the two that way? If so, what would I need to do? Is there another option? Thanks in advance.
Link Posted: 8/26/2001 4:19:22 PM EST
Link Posted: 8/26/2001 4:25:04 PM EST
I have a cable modem as well. You can use a Linksys 4 port router like me, or go to [url]http://www.coyotelinux.com/[/url] and try the software they have and connect it to a hub. I have used the coyote software and it works. It actually works as a firewall.
Link Posted: 8/26/2001 6:24:42 PM EST
Home PNA, but the two computers (the server and the old machine) are sitting on the same desk. The old computer has an ethernet card in it. Any help?
Link Posted: 8/26/2001 6:32:36 PM EST
2 nics in one machine shouldn't be a problem, I've done it in a win98se computer. You would have to use a "crossover" ethernet cable and not a regular one for teh direct connection though. I'm not sure exactly how to set up the software for the setup you'd end up with though, although it should work
Link Posted: 8/26/2001 7:07:47 PM EST
Link Posted: 8/26/2001 7:52:16 PM EST
[Last Edit: 8/26/2001 7:55:06 PM EST by Gloftoe]
Top Top