Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 12/31/2005 2:12:25 PM EST
Link Posted: 12/31/2005 2:19:21 PM EST
It's been over 10 years since I had one apart, I can't remember
Link Posted: 12/31/2005 6:58:26 PM EST
You will have to R&R the tailshaft housing, otherwise not a big deal.
Link Posted: 1/1/2006 4:29:19 AM EST
Link Posted: 1/2/2006 3:07:39 AM EST
No, but I blew up a BW T4 once.
Link Posted: 1/2/2006 5:47:09 PM EST
Link Posted: 1/2/2006 5:50:55 PM EST
If I remember right nothing will fall out of that trans. Except maybe a couple pints of fluid. Put GM syncromesh fluid in it BTW, Supposed to be about the best fluid for the T-5.
Link Posted: 1/3/2006 3:17:39 AM EST
Link Posted: 1/3/2006 4:10:38 AM EST
We were told by our performance parts supplier that the GM stuff is the way to go. Parts managers son used it in a drag car with no problems. I would guess a GOOD synthetic fluid would work well also( Royal purple for instance).
Link Posted: 1/3/2006 6:15:04 PM EST
Link Posted: 1/6/2006 8:14:36 AM EST
I am not near my trannys right now, but you have to disassemble something where your shifter attaches to the linkage rod before you can just remove the housing bolts and pull the housing off. Not a big deal.
Link Posted: 1/6/2006 11:43:37 AM EST
maybe you canucks haven't heard yet, but the T5 is no longer a Borg Warner product, it's now a Tremec T5
Link Posted: 1/6/2006 12:24:54 PM EST
[Last Edit: 1/6/2006 12:26:24 PM EST by Striker]
Link Posted: 1/6/2006 12:42:58 PM EST
[Last Edit: 1/6/2006 12:44:47 PM EST by DeltaAir423]
Yep, 1998 Borg Warner sold the rights to the T5 to Tremec. Borg Warner no longer produces any complete trannys any more, just tranny parts. If you end up having to buy a new T5 it will be a Tremec. Hence the

ETA: There is also over 230 different T5's
Link Posted: 1/6/2006 2:02:05 PM EST
Link Posted: 1/6/2006 6:53:51 PM EST

Originally Posted By Striker:
My tranny doesn't have any shifter linkage..it's all internal.

Do you have amazing psychic powers to cause your transmission to shift gears or do you row the gears with a shifter like the rest of us?

Within that little square thingy that your shifter thingy goes into is your linkage.......

When you remove the 4 bolts from the cover of your shifter housing on the tailhousing and remove it, you will see the socket and back portion of your linkage rod which you have to remove from the rod before you can pull the tail housing off of your tranny.
Top Top