User Panel
Posted: 6/15/2023 3:44:36 PM EDT
Like the title says, I'm in the market for a better torque wrench. The immediate use case is to finish out a long block engine (351C) and install a TKX. Meaning the things like heads and crank are already installed on the block. The parts I need to install call for between 12 and 90ftlb. I'm looking for something that can hit the numbers in that range accurately.
I already have some of the cheap and mid-range asian ones like husky and tekton. From what I see on the youtube tests, these guys have trouble reliably hitting the number they are supposed to hit. The numbers on there are treated more like a suggestion than a setting. Budget wise, I'd like to avoid paying snap-on and matco money if I can avoid it. Is there something decent thats a level or two below snap-on for somebody who wants to do the job right, but doesnt need to do the job all day every day? |
|
Guess I'm still old school, I'm still using the craftsman beam style torque wrench I bought 30+ years ago, used it on quite a bit of Ford n Chevy engine builds and repairs, couple of bikes and other stuff had to torque to spec.
It still torques pretty close to spec |
|
I believe these are cheaper than Snap On and possibly the same company that actually makes Snap On.
I think they are part of the same group of companies. Could be wrong on all of that. CDI torque wrenches |
|
Quoted: I believe these are cheaper than Snap On and possibly the same company that actually makes Snap On. I think they are part of the same group of companies. Could be wrong on all of that. CDI torque wrenches View Quote That is true. Great value with CDI. |
|
Quoted: Guess I'm still old school, I'm still using the craftsman beam style torque wrench I bought 30+ years ago, used it on quite a bit of Ford n Chevy engine builds and repairs, couple of bikes and other stuff had to torque to spec. It still torques pretty close to spec View Quote If I could still buy an old school craftsman one, I would. They are a completely different company with different products, manufactured in different factories than they used to be. I'm shopping for a torque wrench now, not decades ago. |
|
Precision Instruments
They make some of Snap On's torque wrenchea |
|
Quoted: Precision Instruments They make some of Snap On's torque wrenchea View Quote I guess I'm asking a little bit too much with the range I need. I'm going through their catalog and don't see any one item that covers 10 and 90ftlb. CDI does have a 10-100 one, but some of the values I need are at the extreme ends of its range. Maybe I have to end up getting 2 different ones. |
|
Just go get a Harbor Freight. No shit, watch the reviews and tests on YouTube.
|
|
I actually use two different torque wrenches for the range. I use a 1/4” drive inch-pounds for the lower range, and a 3/8” or 1/2” above that. Mine are those cheapy HF units. This lets me hit mid-ish range for each wrench.
My coil packs need to be torqued at 12 ft-lb so so I use the 1/4” set to 144 in-lbs. works for me. |
|
I've been using my digital torque adapter more and more. Turns any wrench or breaker-bar into a torque tool.
Using a long breaker bar saved my arm doing a two-step torque on split rims... |
|
Quoted: I've been using my digital torque adapter more and more. Turns any wrench or breaker-bar into a torque tool. Using a long breaker bar saved my arm doing a two-step torque on split rims... View Quote I had looked at those. I reckon the downside with that is all the room they require. There probably isn't room for a socket+torque adapter+ratchet in a bunch of the places up under the hood. Things like installing headers onto the block and all the accessories and pulleys on the front of the engine. If I get the torque adapters, I will still end up needing a torque wrench to reach some stuff. |
|
I have both a CDI 1002MFRPH (3/8", 10-100 ft-lb) and a 2503MFRPH (1/2", 30-250 ft-lb) and am happy with them. Yeah, it sounds like you may want two for what you're doing.
Seems like Amazon has the best prices lately. You can usually find used in good condition on ebay if you're pinching pennies and willing to take a chance. ETA: You might end up with an inch-lb wrench is you want 12 ft-lbs to be away from the ends of the range. Maybe a 2502MRPH? |
|
Snap on quality fee without snap on prices?
Harbor Freight ICON. |
|
Quoted: I have both a CDI 1002MFRPH (3/8", 10-100 ft-lb) and a 2503MFRPH (1/2", 30-250 ft-lb) and am happy with them. Yeah, it sounds like you may want two for what you're doing. Seems like Amazon has the best prices lately. You can usually find used in good condition on ebay if you're pinching pennies and willing to take a chance. ETA: You might end up with an inch-lb wrench is you want 12 ft-lbs to be away from the ends of the range. Maybe a 2502MRPH? View Quote From what I'm reading, that 10-100 one comes with the certificate that its only certified 20-100 anyways. So I'm probably gonna end up with 2. |
|
Quoted: From what I'm reading, that 10-100 one comes with the certificate that its only certified 20-100 anyways. So I'm probably gonna end up with 2. View Quote I never noticed but that is correct. The lowest I remember using it was for 18. Guess a third wrench is on my buy list. I'm curious to have someone test it at 10 sometime. Will have to ask the inspection department at work if they'll do it. Attached File |
|
Quoted: Snap on quality fee without snap on prices? Harbor Freight ICON. View Quote for a tiny bit more get USA made CDI (snap-on) as has been said numerous times. |
|
Quoted: 100% not this. icon is polished china turd for $139 for a tiny bit more get USA made CDI (snap-on) as has been said numerous times. View Quote If it is made in USA, that’s an amazing price. But if you go to the CDI website they have some with the “Made in USA” listed by them, but this model you listed does not have that. |
|
|
Quoted: If it is made in USA, that’s an amazing price. But if you go to the CDI website they have some with the “Made in USA” listed by them, but this model you listed does not have that. View Quote I just looked. The two I posted above do not have "Made in USA" in their catalog. Pic of engraving. Attached File |
|
Quoted: I just looked. The two I posted above do not have "Made in USA" in their catalog. Pic of engraving. https://www.ar15.com/media/mediaFiles/182397/20230624_142621_jpg-2862453.JPG View Quote Cool! |
|
Quoted: If it is made in USA, that’s an amazing price. But if you go to the CDI website they have some with the “Made in USA” listed by them, but this model you listed does not have that. View Quote View All Quotes View All Quotes Quoted: Quoted: 100% not this. icon is polished china turd for $139 for a tiny bit more get USA made CDI (snap-on) as has been said numerous times. If it is made in USA, that’s an amazing price. But if you go to the CDI website they have some with the “Made in USA” listed by them, but this model you listed does not have that. I got mine from Amazon: |
|
I have CDI/Snap-On for torque wrenches and torque screwdrivers and they're really great. However, I had to get into Gedore torque screwdrivers because they cover a higher inch pound range than CDI's which only go up to 40 inch pounds.
|
|
Go hit up a few pawn shops.
I scored a Snap-On 1/2" drive for $75 a few years ago. Never pay asking price at a pawn shop. |
|
Quoted: Go hit up a few pawn shops. I scored a Snap-On 1/2" drive for $75 a few years ago. Never pay asking price at a pawn shop. View Quote Did you send it in for recalibration? I'd have a hard time trusting a pawn shop torque wrench even though it's a Snap-On. Problem is that once you pay the price for recalibration you might as well have bought a new torque wrench. |
|
Happy to report the torque wrench appears to have worked. Thanks for the suggestions everybody!
I got my motor back together this week and fired it up this morning for the first time. 351C cam breaking in |
|
|
I picked up this gearwrench digit 3/8 off of amazon for $115 on prime day it is $150ish now but download honey and you can have it email you when the price drops
https://www.amazon.com/gp/product/B01AY0JF42/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 |
|
Tekton makes some excellent tools: Tekton torque wrenches.
|
|
Quoted: Tekton makes some excellent tools: Tekton torque wrenches. View Quote If you watch the youtube reviews of import twerk wrenches, the tekton does about the worst of all of them. The dial is basically just for show. It really just has a random number generator inside and will click at a different torque value every time. |
|
Quoted: Did you send it in for recalibration? I'd have a hard time trusting a pawn shop torque wrench even though it's a Snap-On. Problem is that once you pay the price for recalibration you might as well have bought a new torque wrench. View Quote Where I work we get our torque wrenches calibrated for free, sent it in, passes every time. |
|
Quoted: Where I work we get our torque wrenches calibrated for free, sent it in, passes every time. View Quote View All Quotes View All Quotes Quoted: Quoted: Did you send it in for recalibration? I'd have a hard time trusting a pawn shop torque wrench even though it's a Snap-On. Problem is that once you pay the price for recalibration you might as well have bought a new torque wrench. Where I work we get our torque wrenches calibrated for free, sent it in, passes every time. Nice. |
|
|
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.