It looks like I'm closing on a house next Tuesday, and I need to raise some cash for the closing. It's a little more than I thought it'd be, so I'm cleaning out the closet and selling a lot of stuff.
I have a bunch of Decal Grips, which are texturized stickers that go on plastic framed pistols so that you get a better grip. They don't slip around like slip on grips can. From the Decal Grips website:
TUBE OR SLIP ON GRIP TYPE SLEEVES on some guns do not fit perfectly, and allow the gun to shift inside the sleeve and add undesirable bulk to the grip area, throwing aim off. Yet bare polymer has one shortcoming, the grip has a tendency to get slippery when wet, even with generous texturing. A convenient solution is DECAL GRIP, specially designed for the new generation of polymer frame/steel upper handguns. DECAL GRIP IS PRACTICAL, just peel and adhere to pistol, easily removed and replaced and will not harm the surface its applied to or leave residue; VERY,VERY ECONOMICAL, easier on the pocket book; LOOKS OEM! just like if they where an original part of your gun, and will keep looking that way for many years; DECAL GRIP's SLIP-FREE MATERIAL AND SUPERIOR TRACTION OFFER A POSITIVE GRIPPING IN HARSH ENVIRONMENTS. Under stress situations and regardless of sweat, rain, snow, heat, humidity, mud, saltwater or even underwater, etc., your handgun must remain secure in your hand even after recoil or repeated shots, only then your in control of the handgun and your rounds will find their mark quickly and effectively; HYGENIC, it will not hold smell or moister due basically from sweat; IMPERVIOUS AND RESISTANT to water, solvents and oils and virtually indestructible; EXTRAORDINARY THIN AND LIGHTWEIGHT, only 1/40" thick for our sandpaper/grit type texture/material (and 1/32" for rubber type). DECAL GRIP-SAND/GRIT is an excellent choice where the grip width is critical (excellent for the larger capacity/width frame pistols); VERSATILE, you can mix between textures (sand/grit and rubber) and create a unique hybrid grip "The First of its Kind"; ZERO LIGHT REFLECTION, for our rubber texture material; TACTICAL, you use only those pieces/strips necessary; APPROVED AND IN USE TODAY by numerous professional shooters (IPSC, IDPA, etc.)including Military and LEO´s around the country / world.
They want $15 each, I'll sell mine for $5
each. Plus shipping, which will not be much.
I have about 120 of these, and right now I'm not sure what all I have. I know I have ones for Glock 17/18/22/24/31/34/35/37s, Kahr P & TPs, and HK USPs. I am also pretty sure there are others in there, too. But I'm not sure how many of what I have. I will go get them out of storage tomorrow and I can get a better head count then. If anyone wants them all, I'll sell all of them for $500 and I'll pay for shipping. I'd been planning on getting a booth at the gunshow and selling them then, but I need cash now, so.
Edited to add:
I counted them , and I have:
(5) Rubber HK USP 357/40/9mm
(5) Rubber HK USP 357/40/9mm COMPACT
(2) Rubber HK USP 45 COMPACT
(3) Rubber Springfield Armory XD .45acp service, tactical and custom models
(1) Rubber Springfield Armory XD 3",4",5"
(12) Rubber Kahr p & TP 45acp
(5) Rubber Kahr P & PM 9/40
(22) Rubber Glock 17/18/22/24/31/34/35/37 FG (fits third gen Glocks)
(11) Sand Kahr P & TP 45acp
(17) Sand Glock 17/18/22/24/31/34/35/37 FG (fits third gen Glocks)
(3) Sand Glock 17/18/22/24/31/34/35
(4) Sand HK USP 357/40/9mm COMPACT
(11) Sand Kahr P & PM 9/40
(2) Sand Springfield Armory XD 4",5"
(3) Sand Springfield Armory XD .45acp service, tactical and custom models
(13) Sand Springfield Armory XD 3",4",5"
(6) Sand HK USP 45 COMPACT