It is time to thin the herd and make some room for some new stuff. I've tried to describe the rifles as best I can, but if you still have questions, just send me an email or IM. I've been a member here and over at the FALfiles for years, and have solid feedback, so deal with confidence.
Okay, here goes...
I have a FAL on a Dan Coonan receiver (arguably the best of the best, and it's US made) custom built and refinished by Rich at Century Gun Works (CGW). Over at the FALfiles, Rich is famous for his meticulous work and attention to detail. He built this for me from a kit I purchased. The SAW handguard was made for me by an individual over at the FALfiles, and is pretty rugged. If you don't like the handguard, I also have an Israeli LB handguard set that I can substitute. $1000
$950 shipped to the lower 48. Pictures are at the link below.
EDIT: The barrel length is 18", and the muzzle brake adds another 2" for an overall length of 20".
A G1 FAL kit built on a Dan Coonan receiver, also custom built and refinished by Rich at CGW from a G1 kit. Again, if you have any questions, shoot me an email. $1000
$950 shipped to the lower 48. Pictures are below.
* SPF to Eric1911 *
A SAR1 with a Romanian folding stock. The stock is tight and could probably use some lubrication to loosen it up a bit, but it folds nicely and is rock solid. The barrel nut on the end has been removed, and you can see in the pictures that it is not threaded. It's nothing that a threading kit can't take care of though. Everything looks straight on this rifle and it hasn't been shot much. $425 shipped to lower 48. Pictures are below.
* SPF to M590man *
A Romanian WUM1 CUR 7.62x39 AK with thumbhole stock. The muzzle device has been replaced, and it looks like the previous owner tried to tacweld it. It doesn't look real pretty, but it's on there. The rifle in perfect shape, but the sling has some rust on the middle buckle. $400 shipped.
A .223 Galil rifle, custom built by Meeper (reputable builder on the FALfiles who is famous for his ability to build anything) on an ORF receiver. He hand-fitted everything, and since this was an early receiver, he had to do some work to it to make it 100% functional. In the end, he turned out a perfect rifle that functions 100%. I've shot over 300 rounds with this rifle and I've never had a failure of any kind. The kit is all original, other than the U.S. parts inside, the pistol grip and the flash hider. This is NOT a Century-built rifle. $800 $750 shipped to the lower 48. 4 mags and the LULA are included, as pictured below.
SPF to topzki76.
A Romanian CUR2 in AK-74 in 5.45x39. The previous owner threaded the barrel, but there's no muzzle device on it. It also needs the detent pin and spring to retain the muzzle device of your choosing, or you can tac weld it in place. It has what I believe is a Tapco folding stock. Two mags included. $550 $525 shipped to lower 48. Pictures are below:
Thanks for looking.