These will include rails with both left and right side mag stabilizers. The flats and rails will be made from 4130 steel and all standard dimples will be stamped except for the CPS detents on the non-op side. To finish these flats along with the others, you will need to buy a 5mm and 7mm reamer. Or at least get drill bits of that size to open up the holes in the flats once they are bent. At the same time you order the reamers buy 4mm (or 5/32) screw machine drill bits for drilling the trunnion holes. The rear trunnion holes are 4.5mm. Try not to buy the cheap import drill bits for drilling the trunnion holes.
Flat Rate Shipping of $7.95 For as many items as you would like to order on one order, excluding certain cases of ammo.
*** CALL TO ORDER, give us a call at 1 866 523 2673 or 1 866 775 9466 Mon-Fri, 9-5p.m. EST or check out the website and/OR ORDER BY CLICKING HERE: Cope's Distributing