Spikes Cold Hammer Forged Upper Receiver w/ 15" Midwest Industries T-Series Free Float Rail
Components are as follows:
(1) Mil-Spec Upper Receiver w/ T-Marks, Port Door, Forward Assist & M4 Feedramps
(1) Spikes Tactical Cold Hammer Forged 16" Mid-Length 5.56MM 1:7 M249 CL HP MP Barrel
(1) Midwest Industries 15" T-Series Free Float Rail System
(1) Gas Block .750 Low Profile, Mid-Length Gas Tube & Pin
(1) A2 Birdcage Flash Hider
Upper Receiver - Machined from a 7075 T6 Mil-Spec Forging with Mil-Spec Type III Hardcoat Anodized finish, T-markings and M4 feed ramps. Complete with forward assist and ejection door.
16" 1:7 Twist, cold hammer forged barrel w/ .750" diameter gas block seat
These Amazing CHF barrels are extremely durable with a 20,000+ round service life. These CHF barrels are turned to ST's New Optimum barrel Profile. This New profile is lighter than government profile but beefier than a lightweight profile, it's an "Optimum" profile. It weighs 24.4oz with M4 Barrel extension and no FSB on the 16" Barrel. The barrels have a .750" gas block seat with a properly sized gas port and the muzzle is threaded perfectly concentric with 1/2x28 threads. These CHF barrels are made to the Mil-Spec for the M249 SAW. The Cold Hammer Forging process Work Hardens the steel around a rifled mandrel, which creates the lands and grooves. These barrels are chambered in 5.56 NATO, with a 1/7 Twist Rate. The barrel blanks are the correct Certified CMV material and they are also Hard Chrome lined to the M249 SAW Mil-Spec, which is almost twice as thick as the Hard Chrome on a Mil-Spec M4. The End Result is a Rifle that can be Run Hard Day after Day! Each barrel is HPT and MPI. They have Mil-Spec M4 barrel extensions, Mil-Spec Phosphate finish on the outside.
Midwest Industries T-Series 1 Piece Free Float Handguards - Rifle. High MI quality at an affordable price and extremely light weight. Compatible with most gas piston uppers. No gap monolithic look. MIL-STD 1913 rails, T-marked for accessory location. 6061 aluminum, hard coat anodized for a lifetime of service. Requires minor gunsmithing for installation. 17 oz. weight.
$549 + Actual Shipping
If interested, contact me via PM/Email and we'll make arrangements. I accept Paypal (add 2%), USPS/Bank Money Order or Personal Check (must clear before shipment). Thanks for looking.