AR15/M16/AR10 High Tech Non-Rotational Hammer/Trigger Pins with RetainersDIRECT LINK TO THIS PRODUCTwww.globaltactical.com/axami/shop.php?grd=117
This is the hottest setup we have seen for hammer/trigger pins. These pins are made of stainless steel with holes for lube. The pins are threaded on each end. These are available in three diameters, .154” for standard use and .1555” for a tighter fit or receivers with wear in the pin holes and .170 for large pin Colts.
Once the pins are in place in the receiver you simply place the pin retainers over the threaded holes in the pins and secure them with the screws provided. Once installed your hammer/trigger pins will no longer rotate and cause un-necessary receiver wear and the pins also cannot “walk out” to due weak hammer or trigger springs.
The little bullet shaped object in the picture is the EZ install tool and is screwed into the threaded end of the pins. Due to the taper on the EZ tool pin alignment is a snap. All necessary tools come with the kit.
I have used these pins on the lower pictured with our Rock River Arms 2 Stage Match Triggers and they fit perfectly and there is no wobble in either the hammer or the trigger.
I recommend these very, very highly. They eliminate receiver wear, have superior ability to hold lube, stainless steel and are anti-walk. Retail price is $32.00 a pair, GTS price is $29.95, $3 shipping Standard or Oversize and Large pin Colt. HOW TO ORDER:
1. Go to my website and order with Visa, MasterCard, AMEX, Discover or Paypal. Web Address is www.globaltactical.com
2.Order with PayPal. Our PayPal account is DENNYSGUNS@AOL.COM
3. Send Personal Check or Money Order to:
2001 Clay Street
North Kansas City, MO 64116
4. Call our toll free Automatated order line
with your shipping information and credit card number. 1 866 455 5852
5. Call me from 9 to 5 CST 816 809 9452 9AM TO 6PM MON-FRIDAY