For sale is a custom 308 Remington 40X rifle with a Mcmillan Marksman Stock. The rifle has a Remington 40-X single shot action, trued and blueprinted, with a fluted bolt and Sako extractor, The trigger is a 40X and a hole in the trigger guard allow access to the pull adjustment screw without removing the triggerguard (currently set at 4 lbs, crisp break – no creep.) Has a BlackStar Accumax 1:11.25 twist 28 inch stainless barrel with a target crown, chambered with a custom Dan Green reamer ground specifically to use with the Federal 175 match ammo. Also has a Tubb heavy recoil lug. The action also has a Davidson style bolt stop fitted. The action, barrel, and bolt are TefCoated. Comes with a drilled and tapped Badger Ordnance one piece base for six 8-40 screws in place of the usual four 6-48; much stronger and more reliable.
The action and barrel are pillared into the McMillan Marksman pattern stock with Steel Bed epoxy; the pillars under the triggerguard are machined to ensure passive fit when the rear action screw and the front guard screw are torqued down. Stock screw are hex type stainless steel for reliability. This system is similar to the chassis system used by Accuracy International Rifles and minimizes point of impact change when the stock is removed and makes the minimally susceptible to impact/grouping changes related to final torquing of the action screw.
Price is $1,285 shipped to FFL, Good quality scopes accepted as partial trade. Shown Below is a pic of a 5 shot group I shot at 200 yards. Round count is Approx. 185. Email me for more pics. This is an awesome rifle, I am only selling to pay for my new Kemen shotgun. Thanks.