these things are cool, I can fit damn near 14 of these things in my mossberg 500!

How do they feed?  

Good thing you're not in New Jersey (same for most anybody).  That would make your Mossberg and evil ass-gun.

ya how do they feed ???????

Do they work in any shotgun? Where do you pick these up at?

that is the unfortunate thing about these, feeding, These shells can be used in break action or single shot guns. They cycle well in the Winchester 1300 Defender. They will cycle well in some Mossbergs & Remingtons with a slight modification in their elevators. These minishells have about the same "kick" as a 20ga shell these Aguila 12 ga mini shotshells are about $7.00 a box There are 20 shells per box. The powder load is 2 1/2 drams, shell length is 1 3/4", shot load is 7/8oz, velocity is 1250 fps.

How do they work in a stock moss 500?

hey, fool.  i've been looking all over the web for these things.

the importer told me that they didn't know when they would be able to get some more.

where do you gets?

I'd be interested in seeing how these feed in a Remington 1100 or any other auto. My 1100 holds 10 2 3/4 shells. I ought to be able to fit 20 of the minishells. That'd be pretty Damn Sweet

How do you modify the elevator for a Rem. 870?

And once modified, will it affect using reg. 2 3/4" shells?

The elevator porblem is in the hole cut into the middle of the elevator.  The mini-shells are so short they fall through or get jammed in the elevator opening. Winchesters have  solid elevators, so that's why it's not a problem.  All you have to do with a Mossy or Remmie pump is to patch the hole to keep the shell from falling out.  I haven't tried it, since I have a Winchester, but I bet simply using duct tape to give the elevator a solid "floor" would work! I've heard that they don't work in autos because the round does not produce enough pressure to cycle the action, but 30 of these in an 28" 1100 with full mag extension would be KEWEL!  Somebody try it and report back!


Edited b/c I teach physics- not Grammar!