Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Posted: 8/19/2006 8:38:06 PM EDT
I have both 1/7 and 1/9 barrels, will this stabiles the little .22lr enough?
Link Posted: 8/20/2006 6:25:13 AM EDT
im thinking the 1/9 should work with the heavier stuff. probably 40gr or the 60gr. to be sure.
Link Posted: 8/20/2006 1:14:04 PM EDT
I've used that conversion with an 11.5" barrel with a 1/9 twist and it worked fine with and without the suppressor. I easily got a quarter size group at 25 yards.
Link Posted: 8/20/2006 3:53:17 PM EDT
[Last Edit: 8/20/2006 3:53:53 PM EDT by Green0]
I had a 1/9 that put bullets all over the paper at 15yds with 40grain. Like a four or five inch group.

I would use the Aguila SSS.

The added cost is maybe $10 a brick and it will fly accurate and straight in the 1/7-1/9 barrels
Link Posted: 8/21/2006 8:10:54 PM EDT
it will actually over stabilize it and may cause problems ( 22Lr is usually 1-14 or 1-16)
shoot it a bit to make sure you get nice round holes before using the can
Link Posted: 8/21/2006 8:41:24 PM EDT
I thought over-stabilization is impossible?

More likely is the bullet shredding apart from spinning too fast.
Link Posted: 8/21/2006 9:07:22 PM EDT
[Last Edit: 8/21/2006 9:16:09 PM EDT by www-glock19-com]

Originally Posted By AZ-K9:
I thought over-stabilization is impossible?

More likely is the bullet shredding apart from spinning too fast.



I believe you cannot over stabilize a 22LR to destruction like a center fire so yes you are right and I kinda misspoke
but the few times i have played with 1-7 and 1-9 uppers with conversions they were inaccurate enough ( like 4-6" @25yds ) that I would be concerned hanging my suppressor on one
Top Top