[ARCHIVED THREAD] - Tube Identification?

Posted: 3/7/2014 1:00:41 PM EDT

Picked up a new set of NVG's off ebay. Was a gamble, but I got them cheap. The image looks pretty close to my Gen 3 omni III, but I'm hoping someone can help ID the tube.

Also, there is a black blur that looks like a spot in the picture, but when viewing, it really is a blur, and only appears on one side of the NVG. (I think it is a piece of dirt on the inside of the eyepiece). Is it easy to pull the lenses off? Is there a special tool required? I'd like to fix it if possible, even it is means a new nitrogen purge.

Here's the same pic pic with no NVG.

Here is the tube I hope someone can ID:

The housing has dates on it from 2008-2009, so the tube might be newer, or it could be a newer housing and an old tube.

Posted: 3/9/2014 6:37:57 AM EDT

[#1]

Is this an mx-10130c?

Posted: 3/9/2014 11:20:24 AM EDT

[#2]

It looks like those repotted tube (the ID sticker are removed)
If this is coming off a PVS-7 MX-10130 sounds about right.

Posted: 3/9/2014 3:21:58 PM EDT

[#3]

Shouldn't there be a serial number, model, etc on the tube?

Posted: 3/9/2014 3:47:15 PM EDT

[#4]

There is a serial number on the tube and that is the extent of it.

It has a good image that rivals my l3 mx-10130, albeit quite a bit brighter, and slightly better performance in complete darkness.

[ARCHIVED THREAD] - Tube Identification?

Armory Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - Tube Identification?

[ARCHIVED THREAD] - Tube Identification?