Armory Sponsor
Posted: 10/6/2009 2:28:47 PM EDT
anyone have a link  broke the rim of the case off and its stuck good |
|
All you need is:
1/4-20 x 1.5" bolt 1/4-20 tap #28 drill bit several washers to stack over the case (Get several 1/2" and 5/16" as wellas 1/4") Steps: Screw the sizer die in upside down in your press Drill the primer pocket out with the #28 drill bit Tap the new hole with the 1/4-20 tap Stack enough washers to be level with the case rim Screw in the 1/4-20 bolt until the case pops out Cost is about $10 from your local hardware store and will work on every case you ever stick. |
Armory Sponsor