Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
BCM
Member Login

Posted: 1/27/2009 5:27:01 AM EST
has anyone done this and how did you do it?
Link Posted: 1/26/2009 3:56:56 PM EST
cleaned it good and shot it with yellow engine paint

a touch discolored around the front sight, but otherwise OK so far.
Link Posted: 1/26/2009 4:00:21 PM EST
krylon, I wiped it down but didnt even bother really cleaning it.
My FF covers it so I dont know how well its holding up, but after
a couple hundred rounds I can't see any shiny metal
Link Posted: 1/26/2009 4:07:25 PM EST
To what end?
Link Posted: 1/26/2009 4:10:05 PM EST
Quoted:
To what end?

ETA:

Link Posted: 1/26/2009 10:44:17 PM EST
Quoted:
To what end?


I shaved my FSB down to make it a lo pro gas block, since I was spraying the gas block I just hit the tube too.
Link Posted: 1/27/2009 5:42:24 AM EST
I have a yhm ff tube which makes the gas tube very visable so i wanted to paint up the gas tube.
Link Posted: 1/27/2009 7:10:09 AM EST


Link Posted: 1/27/2009 11:47:06 AM EST
Quoted:
I have a yhm ff tube which makes the gas tube very visable so i wanted to paint up the gas tube.


That makes sense I guess. Probably help to rough it up a bit with some emery paper before spraying, but since it is subject to exactly zero wear, I wouldn't be afraid to hit it with some black hi-temp BBQ paint, personally.
Top Top