Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
1/22/2020 12:12:56 PM
Posted: 11/17/2012 6:28:40 AM EST
[Last Edit: 11/17/2012 6:30:20 AM EST by cml2501]
Can someone pls point me in the right direction for a NV monocular that will mount behind my EOTECH?
I’m looking for something with a QR mount and as low as possible so I don’t have to raise up the HWS.
My budget is about $2,000 or so.
thanks

This is the setup I want to mount to (in place of the G33 magnifier)



Link Posted: 11/17/2012 8:07:48 AM EST
good way to find out what you can do is to see what other have done:
http://www.ar15.com/forums/t_6_18/252875_.html

probably best with a pvs14 plus a mount like this:
http://tnvc.com/shop/tnvc-tm14-pvs-14-weapon-mount/

only way to find it all under 2k is used. they have new units that aren't that much more than that.
Link Posted: 11/17/2012 10:17:44 PM EST
TNVC commercial spec PVS-14. You'll need to save up a few hundred more, but it'll be worth it.....plus, it's rated for 5.56, 7.62x39, 6.8, and .300BLK.
Link Posted: 11/18/2012 12:08:52 AM EST
Are you planning on just sitting stationary with your rig? I ask because weapon mounting a PVS-14 is very limiting if you plan on doing any hunting with it. Tell us more about what you intend to do and we can probably help you better.
Link Posted: 11/20/2012 5:20:01 PM EST
I have the same setup, I have an Eotech EXPS3-0 and also the Eotech 3x magnifier. I have a PVS-14 to mount behind the Eotech, my issue is I run the weapon with the 3x magnifier on the PVS-14 which puts the Eotech too far forward for use with the Eotech magnifier. But you can run the PVS-14 without the magnifier which will work fine for most cases although it is nice having 3x for night hunting situations.
Link Posted: 11/23/2012 11:26:42 AM EST
[Last Edit: 11/23/2012 11:28:54 AM EST by TV-PressPass]
I tried this a year or so ago on my Tavor using an ATN spirit and an eotech 512.

It was functional, but not ideal. I'd rather have your NVD helmet mounted and then aim using an IR laser.

http://www.optimumenergy.com/wp-content/uploads/2012/09/FLIR_old_stackup.jpg
Top Top